...
首页> 外文期刊>Journal of Materials Science >Investigation of the drawing mechanism of UHMWPE fibers
【24h】

Investigation of the drawing mechanism of UHMWPE fibers

机译:超高分子量聚乙烯纤维拉伸机理的研究

获取原文
获取原文并翻译 | 示例

摘要

The influence of draw ratios (DR) of gel-spun ultrahigh molecular weight polyethylene (UHMWPE) fibers on resultant morphologies, tensile, degrees of orientation, and crystal phase transition properties were investigated using wide-angle X-ray diffraction (WAXD), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM). The anisotropic crystalline structure with full concentric circular rings originally shown on the WAXD patterns of the as-prepared and drawn UHMWPE fibers gradually transform into oriented fibers with azimuthal spots on the equator as their DR values increase from 1 to 20, in which their orthorhombic crystals, percentage crystallinity, crystalline orientation, and the birefringence values increase significantly. As evidenced by SEM and WAXD analysis, the chain-folded molecules originally present in kebab crystals of the as-prepared UHMWPE fiber specimens gradually transformed into shish-like crystals with relatively high orientation as their DR values increase from 1 to 20. In contrast, the crystallinity and crystal orientation values of the drawn UHMWPE specimens increase only slightly, as their DR values increase from 20 to 40, wherein both crystallinity values of orthorhombic and monoclinic crystals increase slightly. In fact, barely any oriented kebab but only shish crystals were observed on the surfaces of drawn UHMWPE fiber specimens with DR values higher than 20. The birefringence values increase only slightly with further increasing DR values, while crystallinity and crystal orientation values of the drawn UHMWPE fiber specimens remained relatively unchanged as their DR values increase from 40 to 150. In the meantime, the monoclinic crystals gradually grow at the expense of the orthorhombic form crystals as the DR values of drawn UHMWPE fiber specimens increase from 40 to 150. Possible reasons accounting for these interesting properties found for the drawn UHMWPE fibers with varying draw ratios are proposed in this study.
机译:使用广角X射线衍射(WAXD),差示法研究了凝胶纺制的超高分子量聚乙烯(UHMWPE)纤维的拉伸比(DR)对所得形态,拉伸,取向度和晶体相变性质的影响扫描量热法(DSC)和扫描电子显微镜(SEM)。最初在制备和拉伸的UHMWPE纤维的WAXD图案上显示的具有完整同心圆环的各向异性晶体结构,随着其DR值从1增加到20,逐渐转变为在赤道上带有方位角斑点的定向纤维,其中它们的正交晶体,结晶度百分比,晶体取向和双折射值显着增加。正如SEM和WAXD分析所证明的那样,原先存在于所制备的UHMWPE纤维样品的烤肉串晶体中的链状折叠分子,随着其DR值从1增加到20,逐渐转变成具有较高取向的呈光泽的晶体。拉伸的UHMWPE标本的结晶度和晶体取向值仅略有增加,因为其DR值从20增加到40,其中正交晶和单斜晶的结晶度都略有增加。实际上,在拉制的UHMWPE纤维样品的DR值高于20时,几乎看不到任何取向的烤肉串,但仅观察到微晶。随着DR值的进一步增加,双折射值仅略有增加,而拉制的UHMWPE的结晶度和晶体取向值纤维样品的DR值从40增加到150时,相对保持不变。同时,随着拉制的UHMWPE纤维样品的DR值从40增加到150,单斜晶体逐渐以正交晶形晶体为代价。在这项研究中,针对具有不同拉伸比的拉伸UHMWPE纤维发现的这些有趣特性提出了建议。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号