...
首页> 外文期刊>Langmuir: The ACS Journal of Surfaces and Colloids >Surfactant-Induced Ordering and Wetting Transitions of Droplets of Thermotropic Liquid Crystals 'Caged' Inside Partially Filled Polymeric Capsules
【24h】

Surfactant-Induced Ordering and Wetting Transitions of Droplets of Thermotropic Liquid Crystals 'Caged' Inside Partially Filled Polymeric Capsules

机译:表面活性剂引起的部分填充的聚合物胶囊内部“封闭”的热致液晶的液滴的有序化和润湿转变

获取原文
获取原文并翻译 | 示例
           

摘要

We report a study of the wetting and ordering of thermotropic liquid crystal (LC) droplets that are trapped (or "caged") within micrometer-sized cationic polymeric microcapsules dispersed in aqueous solutions of surfactants. When they were initially dispersed in water, we observed caged, nearly spherical droplets of E7, a nematic LC mixture, to occupy similar to 40% of the interior volume of the polymeric capsules [diameter of 6.7 +/- 0.3 mu m, formed via covalent layer-by-layer assembly of branched polyethylenimine and poly(2-vinyl-4,4-dimethylazlactone)] and to contact the interior surface of the capsule wall at an angle of similar to 157 +/- 11 degrees. The internal ordering of LC within the droplets corresponded to the so-called bipolar configuration (distorted by contact with the capsule walls). While the effects of dodecyltrimethylammonium bromide (DTAB) and sodium dodecyl sulfate (SDS) on the internal ordering of "free" LC droplets are similar, we observed the two surfactants to trigger strikingly different wetting and configurational transitions when LC droplets were caged within polymeric capsules. Specifically, upon addition of SDS to the aqueous phase, we observed the contact angles (theta) of caged LC on the interior surface of the capsule to decrease, resulting in a progression of complex droplet shapes, including lenses (theta approximate to 130 +/- 10 degrees), hemispheres (theta approximate to 89 +/- 5 degrees), and concave hemispheres (theta < 85 degrees The wetting transitions induced by SDS also resulted in changes in the internal ordering of the LC to yield states topologically equivalent to axial and radial configurations. Although topologically equivalent to free droplets, the contributions that surface anchoring, LC elasticity, and topological defects make to the free energy of caged LC droplets differ from those of free droplets. Overall, these results and others reported herein lead us to conclude that caged LC droplets offer a platform for new designs of LC-droplet-based responsive soft matter that cannot be realized in dispersions of free droplets.
机译:我们报告了一种热致液晶(LC)液滴的润湿和有序性的研究,这些液滴被困在(或“笼中”)分散在表面活性剂水溶液中的微米级阳离子聚合物微胶囊中。当它们最初分散在水中时,我们观察到笼状的,呈球形的E7(向列LC混合物)液滴几乎占据了聚合物胶囊内部体积的40%[直径6.7 +/- 0.3微米,通过支化聚乙烯亚胺和聚(2-乙烯基-4,4-二甲基氮杂内酯)的共价逐层组装,并以近似157 +/- 11度的角接触胶囊壁的内表面。液滴中LC的内部顺序对应于所谓的双极配置(因与胶囊壁接触而变形)。尽管十二烷基三甲基溴化铵(DTAB)和十二烷基硫酸钠(SDS)对“游离” LC液滴内部顺序的影响相似,但当LC液滴被笼罩在聚合物胶囊中时,我们观察到两种表面活性剂触发了截然不同的润湿和构型转变。具体而言,在将SDS加入水相后,我们观察到笼状LC在胶囊内表面上的接触角(θ)减小,从而导致复杂的液滴形状(包括晶状体)发展(θ约为130 + / -10度),半球(θ约为89 +/- 5度)和凹半球(θ<85度)SDS引起的润湿转变也导致LC的内部顺序发生变化,从而产生拓扑上与轴向等效的状态尽管在拓扑结构上与自由液滴等效,但表面锚固,LC弹性和拓扑缺陷对笼状LC液滴的自由能的贡献与自由液滴的贡献不同。结论是笼状LC液滴为基于LC液滴的响应性软物质的新设计提供了一个平台,而这种设计不能在自由液滴的分散体中实现。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号