Plasma Spray Coatings of Ni-Al-SiC Composite

摘要

Ni-Al-SiC powder mixture containing 12 wt.% SiC was prepared by conventional ball milling. Morphological and microstructural investigations showed that powder particles after 15 h of milling time had the optimum characteristics with respect to their size and microstructure. X-ray diffraction patterns of powder particles included only the elemental Ni, Al, and SiC peaks without any traces of oxides or intermetallic phases. The powder mixture was then deposited onto a steel substrate by atmospheric plasma spray (APS) process under different conditions. The results showed that under APS conditions used here, the coatings were composed of various intermetallics including Ni-Al and Ni{sub}2Al{sub}3. The mean hardness of coating was found to be about 567 HV. It was also found that by increasing current density of APS, the coating/substrate adhesive strength was increased.