Prediction of surface roughness and dimensional deviation of workpiece in turning: a machine vision approach

摘要

In the past, roughness values measured directly on machined surfaces were used to develop mathematical models that are used in predicting surface roughness in turning. This approach is slow and tedious because of the large number of workpieces required to obtain the roughness data. In this study, 2-D images of cutting tools were used to generate simulated workpieces from which surface roughness and dimensional deviation data were determined. Compared to existing vision-based methods that use features extracted from a real workpiece to represent roughness parameters, in the proposed method, only simulated profiles of the workpiece are needed to obtain the roughness data. The average surface roughness R_a, as well as dimensional deviation data extracted from the simulated profiles for various feed rates, depths of cut, and cutting speeds were used as the output of response surface methodology (RSM) models. The predictions of the models were verified experimentally using data obtained from measurements made on the real workpieces using conventional methods, i.e., surface roughness tester and a micrometer, and good correlation between the two methods was observed.