首页> 外文期刊>Polymer Composites >Bulk Fatigue Damage Evolution in Polyamide-6 and in a Polyamide-6 Nanocomposite
【24h】

Bulk Fatigue Damage Evolution in Polyamide-6 and in a Polyamide-6 Nanocomposite

机译:聚酰胺6和聚酰胺6纳米复合材料的整体疲劳损伤演化

获取原文
获取原文并翻译 | 示例
       

摘要

The mechanical response of a polyamide-6 montmoril-lonite clay nanocomposite and of a polyamide-6 was monitored during axial fatigue tests performed at R-ratios of 0.1 and-1.For both materials,two transitions were usually observed in the evolution of all the stress-strain-time parameters studied after similar numbers of loading cycles,suggesting interrelationships between the mechanisms of molecular reorganization.Fatigue test monitoring indicated an initial decrease in the storage modulus and a subsequent trend for this modulus to increase,especially in polyamide-6.During all tests,a partially recoverable strain was accumulated because of viscoelastic deformation.Nanoparticles reduced this strain in the initial cyclic straining regime but not in the last regime,probably because such particles cannot inhibit viscoelastic events constrained in a volume larger than their interaction volume within the matrix.Based on the accumulated volume variation measured,the nucle-ation and growth of microvoids can be expected to occur in the last cyclic straining regime.
机译:在轴向疲劳试验中,R-比值分别为0.1和-1时,可以监测聚酰胺6蒙脱土-长石粘土纳米复合材料和聚酰胺6的机械响应。对于这两种材料,在所有材料的演变过程中通常观察到两个转变在相似数量的加载循环后研究了应力-应变时间参数,暗示了分子重组机制之间的相互关系。疲劳试验监测表明,储能模量开始下降,随后该趋势增加,特别是在聚酰胺6中在所有测试过程中,由于粘弹性变形而积累了部分可恢复的应变。纳米颗粒在初始循环应变方式中减小了该应变,但在最后一个状态中则没有,这可能是因为此类粒子无法抑制被约束在大于其相互作用体积的体积中的粘弹性事件根据测量的累积体积变化,核的成核和生长可以预期在最后的循环过滤过程中会出现微孔。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号