首页> 外文期刊>Chemical Engineering Science >Development of simultaneous membrane distillation-crystallization (SMDC) technology for treatment of saturated brine
【24h】

Development of simultaneous membrane distillation-crystallization (SMDC) technology for treatment of saturated brine

机译:同时膜蒸馏-结晶(SMDC)技术处理饱和盐水的开发

获取原文
获取原文并翻译 | 示例
           

摘要

We have developed the simultaneous membrane distillation-crystallization (SMDC) hybrid desalination technology for the concurrent productions of pure water and salt crystal from the saturated brine solutions. The effects of feed temperature variation from 40°C to 70°C on the SMDC performance in terms of membrane flux and kinetics of NaCl crystallization have been investigated. Increasing feed temperature increases membrane flux but the flux declines rapidly with time at higher feed temperatures (60°C and 70°C) due to the occurrences of membrane scaling and wetting facilitated by salt oversaturation at the boundary layer. In order to prevent salt oversaturation, we have calculated the critical fluxes at different Reynolds numbers and crystallizer temperatures. For instance, the critical fluxes when the feed temperature is 70°C increase from 5kgm~(-2)h~(-1) to 20kgm~(-2)h~(-1) for the laminar and turbulent flows, respectively. By keeping the membrane flux lower than the critical flux, a stable membrane performance during a continuous SMDC operation over the period of 5000min has been achieved. Increasing feed temperature also increases the yield of NaCl crystals from 7.5kgperm~3 solution to 34kgperm~3 for feed temperatures of 40°C and 70°C after 200min operation, respectively. However, the average crystal sizes decrease from 87.40μm to 48.82μm with increasing feed temperatures from 40°C to 70°C due to a higher nucleation rate at a higher degree of supersaturation. Regardless of the feed temperature, the NaCl crystals are in a uniform cubical shape with the coefficient of variations which are in the range of 30-38% that implies a narrow dispersion.
机译:我们已经开发了同时膜蒸馏-结晶(SMDC)混合脱盐技术,用于从饱和盐水溶液中同时生产纯净水和盐晶体。研究了进料温度从40°C到70°C变化对SMDC性能的影响,包括膜通量和NaCl结晶动力学。进料温度升高会增加膜通量,但在较高进料温度(60°C和70°C)下,通量会随时间迅速下降,这是由于边界层盐分过饱和促进了膜结垢和润湿。为了防止盐过饱和,我们计算了不同雷诺数和结晶器温度下的临界通量。例如,对于层流和湍流,当进料温度为70°C时,临界通量分别从5kgm〜(-2)h〜(-1)增加到20kgm〜(-2)h〜(-1)。通过将膜通量保持在低于临界通量的水平,可实现连续5000分钟SMDC操作过程中的稳定膜性能。进料温度的升高还可以使200min操作后进料温度分别为40°C和70°C时NaCl晶体的产率从7.5kgperm〜3溶液增加到34kgperm〜3。但是,由于进料温度从40°C升高到70°C,平均晶体尺寸从87.40μm减小到48.82μm,这是由于在较高的过饱和度下具有较高的成核速率。不管进料温度如何,NaCl晶体都是均匀的立方形状,其变异系数在30-38%的范围内,这意味着分散较窄。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号