...
首页> 外文期刊>Water Research >Characterisation of plastic microbeads in facial scrubs and their estimated emissions in Mainland China
【24h】

Characterisation of plastic microbeads in facial scrubs and their estimated emissions in Mainland China

机译:中国大陆面部磨砂膏中塑料微珠的表征及其估计排放

获取原文
获取原文并翻译 | 示例
           

摘要

Plastic microbeads are often added to personal care and cosmetic products (PCCPs) as an abrasive agent in exfoliants. These beads have been reported to contaminate the aquatic environment and are sufficiently small to be readily ingested by aquatic organisms. Plastic microbeads can be directly released into the aquatic environment with domestic sewage if no sewage treatment is provided, and they can also escape from wastewater treatment plants (WWTPs) because of incomplete removal. However, the emissions of microbeads from these two sources have never been estimated for China, and no regulation has been imposed on the use of plastic microbeads in PCCPs. Therefore, in this study, we aimed to estimate the annual microbead emissions in Mainland China from both direct emissions and WWTP emissions. Nine facial scrubs were purchased, and the microbeads in the scrubs were extracted and enumerated. The microbead density in those products ranged from 5219 to 50,391 particles/g, with an average of 20,860 particlesig. Direct emissions arising from the use of facial scrubs were estimated using this average density number, population data, facial scrub usage rate, sewage treatment rate, and a few conservative assumptions. WWTP emissions were calculated by multiplying the annual treated sewage volume and estimated microbead density in treated sewage. We estimated that, on average, 209.7 trillion microbeads (306.9 tonnes) are emitted into the aquatic environment in Mainland China every year. More than 80% of the emissions originate from incomplete removal in WWTPs, and the remaining 20% are derived from direct emissions. Although the weight of the emitted microbeads only accounts for approximately 0.03% of the plastic waste input into the ocean from China, the number of microbeads emitted far exceeds the previous estimate of plastic debris (>330 mu m) on the world's sea surface. Immediate actions are required to prevent plastic microbeads from entering the aquatic environment. (C) 2017 Elsevier Ltd. All rights reserved.
机译:通常将塑料微珠作为去角质剂中的研磨剂添加到个人护理和化妆品(PCCP)中。据报道,这些珠子污染了水生环境,并且足够小以至于容易被水生生物摄取。如果不提供污水处理,塑料微珠可以与生活污水一起直接释放到水生环境中,并且由于去除不彻底,它们也可能从污水处理厂(WWTP)逃脱。但是,中国从未对这两种来源的微珠排放进行过估算,也没有对PCCP中塑料微珠的使用进行监管。因此,在这项研究中,我们旨在从直接排放和污水处理厂排放中估算中国大陆的年度微珠排放。购买了九种磨砂膏,提取并列举了磨砂膏中的微珠。这些产品中的微珠密度范围为5219至50,391颗粒/ g,平均为20,860颗粒ig。使用这种平均浓度,人口数据,清洗液使用率,污水处理率和一些保守的假设来估算使用清洗剂产生的直接排放量。污水处理厂的排放量是通过将处理后的污水的年处理量和估计的微珠密度相乘得出的。我们估计,中国大陆每年平均向水生环境排放209.7万亿微珠(306.9吨)。超过80%的排放源于污水处理厂的不完全清除,其余20%来自直接排放。尽管散发的微珠的重量仅占从中国输入到海洋的塑料废物的约0.03%,但散发的微珠的数量远远超过了先前在世界海表上估计的塑料碎片(> 330微米)。需要立即采取行动,以防止塑料微珠进入水生环境。 (C)2017 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号