...
首页> 外文期刊>Transport in Porous Media >Extrudate Trilobe Catalysts and Loading Effects on Pressure Drop and Dynamic Liquid Holdup in Porous Media of Trickle Bed Reactors
【24h】

Extrudate Trilobe Catalysts and Loading Effects on Pressure Drop and Dynamic Liquid Holdup in Porous Media of Trickle Bed Reactors

机译:滴流三叶催化剂及其对滴流床反应器多孔介质中压降和动态持液量的影响

获取原文
获取原文并翻译 | 示例
           

摘要

The hydrodynamics of concurrent gas-liquid downflow through a porous media of fixed bed reactor has been studied experimentally in a range of trickling flow rates. A pilot bed is packed with industrial spherical and extrudate trilobe catalysts. The industrial trilobe catalysts are packed in a bed using two different methods: random close or dense packing and random sock packing. The experiments are performed for single phase in the cases of wet and dry packed beds and for two-phase flow conditions. The comparisons of pressure drops as well as liquid holdup are carried out for the above three different porous media, random close, dense packing and random sock packing. It is shown that the pressure drop of the dense loaded bed is higher than that of spherical particles which have approximately the same porosity. The results also revealed that the bed porosity, shape and contact points of the loaded catalyst have significant effects on the dynamic liquid holdup of the TBRs. Finally, a new correlation was developed for dynamic liquid holdup and pressure drop calculation for trilobe dense and sock catalyst beds and beds which are loaded with spherical particles.
机译:在滴流流速范围内,已经对通过固定床反应器多孔介质的同时气-液向下流动的流体动力学进行了实验研究。试验床装有工业球形和挤出物三叶形催化剂。工业三叶形催化剂使用两种不同的方法装在床中:无规紧密或密集装填和无规袜子装填。在湿床和干床的情况下对单相进行实验,对两相流动条件进行实验。对以上三种不同的多孔介质(无规密闭,密实填料和无规袜填料)进行了压降和持液率的比较。结果表明,致密负载床的压降高于具有近似相同孔隙率的球形颗粒的压降。结果还表明,负载的催化剂的床孔率,形状和接触点对TBR的动态持液率有显着影响。最后,开发了一种新的相关性,用于三叶状密实和袜子状催化剂床以及装有球形颗粒的床的动态液体滞留量和压降计算。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号