首页> 外文期刊>Transport in Porous Media >Effects of Convection and Fracture Boundary Conditions on Heat Transfer Shape Factor in Fractured Geothermal Reservoirs
【24h】

Effects of Convection and Fracture Boundary Conditions on Heat Transfer Shape Factor in Fractured Geothermal Reservoirs

机译:对流和断裂边界条件对裂缝性地热储层传热形状因子的影响

获取原文
获取原文并翻译 | 示例
           

摘要

Advection-conduction equation (ACE) used to explain the combined conduction and convection mechanisms of heat transfer thorough porous media has received considerable attention with a wide range of applications in various disciplines. The present study concentrates on developing a generalized analytical solution to ACE through incorporation of Fourier series and a new dependent variable for the problem of heat transfer through porous media in one-dimensional finite spatial region assuming transient boundary conditions. Then, assuming that a fracture acts as the time-dependent boundary condition, an analytical solution is obtained for a typical fractured porous medium. Based on the analytical solution, heat transfer shape factor is also obtained, on which the effects of governing parameters of matrix block such as Peclet number are investigated throughout transient and pseudo-steady-state (PSS) periods for the first time. Moreover, a correlation is generated to estimate the PSS heat transfer shape factor in terms of dimensionless time and Peclet number for constant concentration and linearly ascending temperature boundary conditions. Additionally, the numerical finite difference and finite element methods were utilized to validate the analytical solution results. The results demonstrated that the obtained generalized analytical solution can be regarded as a reliably excellent and accurate mathematical lever to describe the heat transfer phenomenon through porous media subject to determine transient boundary conditions and also to verify numerical results.
机译:用于解释通过多孔介质传热的热传导和对流组合机理的对流传导方程(ACE)受到了广泛的关注,并在各个领域得到了广泛的应用。本研究致力于通过结合傅立叶级数和一个新的因变量,针对瞬态边界条件下的一维有限空间区域中的多孔介质传热问题,开发出一种通用的ACE分析解决方案。然后,假设裂缝是随时间变化的边界条件,则可以得到典型裂缝多孔介质的解析解。基于解析解,还获得了传热形状因子,首次在整个瞬态和伪稳态(PSS)期间研究了矩阵块的控制参数(如Peclet数)的影响。此外,对于恒定浓度和线性上升的温度边界条件,将生成一个相关性以根据无因次时间和Peclet数估算PSS传热形状因子。此外,利用数值有限差分法和有限元方法来验证解析解的结果。结果表明,所获得的广义解析解可以被视为可靠,优良且精确的数学杠杆,用于描述通过多孔介质的传热现象,确定瞬态边界条件,并验证数值结果。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号