...
首页> 外文期刊>Transactions of Nonferrous Metals Society of China >Hydrogen storage properties of Mg-doped Ti_(1.2)Fe alloys synthesized by mechanical alloying
【24h】

Hydrogen storage properties of Mg-doped Ti_(1.2)Fe alloys synthesized by mechanical alloying

机译:机械合金化镁掺杂Ti_(1.2)Fe合金的储氢性能

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Hydrogen storage properties and phase components of Mg-doped TiFe alloys, that were prepared by Ti, Fe and Mg metal powders using a mechanical alloying technique, were studied. XRD analyses show that the main phase of all the Mg-doped Ti_(1.2)Fe alloys is the TiFe phase. Some TiFe_2 phase and α-Ti phase exist as secondary phases and Mg is dispersed in the alloy matrix. 3% Mg-doped and 5% Mg-doped Ti_(1.2)Fe alloy samples can be fully activated within three hydriding/dehydriding cycles at room temperature and the hydrogen storage capacities of the alloys can reach 222 mL/g and 198 mL/g, respectively. Both two samples exhibit only one plateau region in their P-C-T curves with a low hydrogen absorption/desorption pressure hysteresis. The effect and mechanism of Mg addition as well as overstoichiometric Ti on the activation properties and hydrogen storage capacities of the alloys was also discussed.
机译:研究了由Ti,Fe和Mg金属粉末使用机械合金化技术制备的Mg掺杂TiFe合金的储氢性能和相组成。 XRD分析表明,所有掺Mg的Ti_(1.2)Fe合金的主要相均为TiFe相。一些TiFe_2相和α-Ti相作为第二相存在,并且Mg分散在合金基体中。 3%的Mg掺杂和5%的Mg掺杂的Ti_(1.2)Fe合金样品可以在室温下的三个氢化/脱水循环中完全活化,并且合金的储氢量可以达到222 mL / g和198 mL / g , 分别。这两个样品在其P-C-T曲线中仅显示一个平稳区域,具有低的氢吸收/解吸压力滞后。还讨论了添加Mg以及化学计量过量的Ti对合金的活化性能和储氢能力的影响和机理。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号