...
首页> 外文期刊>Thin-Walled Structures >Nonlinear stability of unsymmetrically laminated angle-ply shear-deformable plates in biaxial compression
【24h】

Nonlinear stability of unsymmetrically laminated angle-ply shear-deformable plates in biaxial compression

机译:双轴压缩中非对称夹层可变形剪力板的非线性稳定性

获取原文
获取原文并翻译 | 示例

摘要

The generalized Karman-Reissner equations governing large deflection of unsymmetrically laminated angle-ply shear-deformable rectangular plates are presented in this paper, based upon Karman and Reissner plate theories. Much effort has been concentrated on derivation of the Karman-Reissner equations for the laminates taking account of transverse shear effects so that only two unknown functions for nonlinear analysis need to be treated to gain a precise insight into the complexities, otherwise high-order refined plate theories must be applied. An asymptotic series solution is constructed according to the Karman-type refined theory for post- buckling behavior of the plates with the boundary condition of four edges simply supported. Typical numerical examples are presented for comparison with other nonlinear analytical and experimental results. The effects of shear deformation, lamination angle and geometrical imperfection on buckling and postbuckling behaviors of the laminates suhjected to a combi- nation of biaxial compressive loadings are examined for industrial application.
机译:基于Karman和Reissner板理论,本文提出了控制不对称叠层可剪切变形矩形板大挠度的广义Karman-Reissner方程。考虑到横向剪切效应,已经集中精力进行了层压板的Karman-Reissner方程的推导,因此只需要处理两个未知的非线性分析函数即可获得对复杂性的精确了解,否则将获得高阶精制板理论必须被应用。根据Karman型精细化理论构造一个渐近级数解,以简单支撑四个边的边界条件来确定板的屈曲后行为。给出了典型的数值示例,以与其他非线性分析和实验结果进行比较。研究了剪切变形,叠片角度和几何缺陷对承受双轴压缩载荷组合的层压板的屈曲和后屈曲行为的影响,以进行工业应用。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号