Experimental behaviour of thin-walled hollow structural steel (HSS) columns filled with self-consolidating concrete (SCC)

摘要

In modern building construction, thin-walled hollow structural steel (HSS) sections are often filled with concrete to form a composite column. In recent years, the use of self-consolidating concrete (SCC), or self-compacting concrete, in such kinds of columns has been of interest to many structural engineers. Due to its rheological properties, the disadvantage of vibration can be eliminated while still obtaining good consolidation. Apart from reliability and constructability, advantages such as elimination of noise in processing plants, and the reduction of construction time and labor cost can be achieved. It is expected that SCC will be used in concrete-filled HSS columns in the future because of its good performance. However, the composite members are susceptible to the influence of concrete compaction. The lack of information on the behavior of HSS columns filled with SCC indicates a need for further research in this area. The present study is an attempt to study the possibility of using thin-walled HSS columns filled with SCC. New test data on 38 HSS columns filled with SCC to investigate the influence of concrete compaction methods on the member capacities of the composite columns are reported. The specimen tests allowed for the different conditions likely to arise in the manufacture of concrete: cured, well compacted with a poker vibrator, well compacted by hand, and self-consolidating without any vibration. The main parameters varied in the tests are: (1) column section type, circular and square; (2) tube diameter (or depth) to thickness ratio, from 33 to 67; and (3) load eccentricity ratio (e/r), from 0 to 0.3 mm. Comparisons are made with predicted column strengths using the existing codes such as AISC-LRFD-1999, AIJ-1997, BS5400-1979, EC4-1994, DL5085/T-1999 and GJB4142-2000.