On the local and distortional post-buckling behaviour of thin-walled regular polygonal tubular columns

摘要

This paper presents and discusses numerical results concerning the (i) elastic local and distortional post-buckling behaviours and (ii) imperfection sensitivity of regular convex polygonal cross-section (RCPS) simply supported tubes under uniform compression (columns). Although it was shown recently that the local and distortional buckling behaviours may be often characterised by duplicate bifurcation modes, knowledge concerning the corresponding post-buckling behaviour is still lacking. The results presented are obtained through a geometrically non-linear Generalised Beam Theory (GBT) formulation previously reported by the authors. This GBT formulation is first employed to characterise the column bifurcation behaviour, namely by helping to pinpoint the occurrence of the above two distinct buckling behaviours. Then, post-buckling results are presented and discussed for (i) different combinations of the local-to-distortional buckling load ratio and the (ii) amplitude of the critical-mode initial geometrical imperfections, in order to characterise the RCPS column imperfection sensitivity. Such results provide the evolution, along given equilibrium paths, of the column deformed configurations (expressed in GBT modal form), relevant displacement profiles and participation diagrams based on either stress resultant strain energies or amplitude functions. For comparison and validation purposes, ABAQUS shell finite element values are reported.