首页> 外文期刊>Soil Dynamics and Earthquake Engineering >Effects of site stiffness and source to receiver distance on surface wave tests' results
【24h】

Effects of site stiffness and source to receiver distance on surface wave tests' results

机译:站点刚度和源到接收器距离对表面波测试结果的影响

获取原文
获取原文并翻译 | 示例
           

摘要

By using six 4.5 Hz geophones, surface wave tests were performed on four different sites by dropping freely a 65 kg mass from a height of 5 m. The receivers were kept far away from the source to eliminate the arrival of body waves. Three different sources to nearest receiver distances (S), namely, 46 m, 56 m and 66 m, were chosen. Dispersion curves were drawn for all the sites. The maximum wavelength (lambda(max)), the maximum depth (d(max)) up to which exploration can be made and the frequency content of the signals depends on the site stiffness and the value of S. A stiffer site yields greater values of lambda(max) and d(max). For stiffer sites, an increase in S leads to an increase in lambda(max). The predominant time durations of the signals increase from stiffer to softer sites. An inverse analysis was also performed based on the stiffness matrix approach in conjunction with the maximum vertical flexibility coefficient of ground surface to establish the governing mode of excitation. For the Site 2, the results from the surface wave tests were found to compare reasonably well with that determined on the basis of cross boreholes seismic tests. (C) 2015 Elsevier Ltd. All rights reserved.
机译:通过使用六个4.5 Hz地震检波器,通过从5 m的高度自由下落65 kg的重物,在四个不同的位置进行了表面波测试。接收器应远离信号源,以消除体波的到来。选择了最接近接收器距离(S)的三个不同源,即46 m,56 m和66 m。绘制了所有位置的分散曲线。可以进行探测的最大波长(λ(max)),最大深度(d(max))和信号的频率含量取决于部位的刚度和S值。部位越僵硬,产生的值越大λ(max)和d(max)的关系。对于较硬的位置,S的增加导致lambda(max)的增加。信号的主要持续时间从较硬的位置增加到较软的位置。还基于刚度矩阵方法结合地面的最大垂直挠性系数进行了反分析,以建立激励的控制模式。对于站点2,发现表面波测试的结果与基于交叉孔地震测试确定的结果相当合理。 (C)2015 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号