首页> 外文期刊>Science of the total environment >Elemental composition at different points of the rainwater harvesting system
【24h】

Elemental composition at different points of the rainwater harvesting system

机译:雨水收集系统不同点的元素组成

获取原文
获取原文并翻译 | 示例
           

摘要

Entry of contaminants, such as metals and non-metals, into rainwater harvesting systems can occur directly from rainfall with contributions from collection surfaces, accumulated debris and leachate from storage systems, pipes and taps. Ten rainwater harvesting systems on the east coast of Australia were selected for sampling of roof runoff, storage systems and tap outlets to investigate the variations in rainwater composition as it moved throughout the system, and to identify potential points of contribution to elemental loads. A total of 26 elements were screened at each site. Iron was the only element which was present in significantly higher concentrations in roof runoff samples compared with tank tap samples (P<0.05). At one case study site, results suggested that piping and tap material can contribute to contaminant loads of harvested rainwater. Increased loads of copper were observed in hot tap samples supplied by the rainwater harvesting system via copper piping and a storage hot water system (P<0.05). Similarly, zinc, lead, arsenic, strontium and molybdenum were significantly elevated in samples collected from a polyvinyl chloride pipe sampling point that does not supply household uses, compared with corresponding roof runoff samples (P<0.05). Elemental composition was also found to vary significantly between the tank tap and an internal cold tap at one of the sites investigated, with several elements fluctuating significantly between the two outlets of interest at this site, including potassium, zinc, manganese, barium, copper, vanadium, chromium and arsenic.rnThese results highlighted the variability in the elemental composition of collected rainwater between different study sites and between different sampling points. Atmospheric deposition was not a major contributor to the rainwater contaminant load at the sites tested. Piping materials, however, were shown to contribute significantly to the total elemental load at some locations.
机译:诸如金属和非金属之类的污染物进入雨水收集系统的过程可能直接来自降雨,而降雨来自收集表面,来自存储系统,管道和水龙头的堆积碎屑和渗滤液。在澳大利亚东海岸,选择了十个雨水收集系统来取样屋顶径流,存储系统和水龙头出口,以调查雨水在整个系统中移动时的组成变化,并确定可能造成基本负荷的点。每个站点总共筛选了26个元素。与屋顶水龙头样品相比,铁是唯一存在于屋顶径流样品中浓度显着更高的元素(P <0.05)。在一个案例研究现场,结果表明,管道和水龙头材料可能会增加收获的雨水的污染物负荷。雨水收集系统通过铜管和储水热水系统提供的热水龙头样品中铜的负载增加(P <0.05)。同样,从不提供家庭用途的聚氯乙烯管采样点采集的样品中的锌,铅,砷,锶和钼与相应的屋顶径流样品相比也显着升高(P <0.05)。还发现,在所研究的位置之一处,水槽水龙头和内部冷水龙头之间的元素组成也存在显着差异,该位置上感兴趣的两个出口之间的几种元素有明显的波动,包括​​钾,锌,锰,钡,铜,钒,铬和砷。这些结果突显了不同研究地点之间以及不同采样点之间收集到的雨水的元素组成存在差异。在测试地点,大气沉积不是造成雨水污染物负荷的主要因素。但是,在某些位置,管道材料已显示出对总元素载荷的显着贡献。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号