首页> 外文期刊>The Science of the Total Environment >A pollutant load hierarchical allocation method integrated in an environmental capacity management system for Zhushan Bay, Taihu Lake
【24h】

A pollutant load hierarchical allocation method integrated in an environmental capacity management system for Zhushan Bay, Taihu Lake

机译:太湖竹山湾环境容量管理系统中污染物负荷分级分配方法

获取原文
获取原文并翻译 | 示例
           

摘要

An environmental capacity management (ECM) system was developed to help practically implement a Total Maximum Daily Load (TMDL) for a key bay in a highly eutrophic lake in China. The ECM system consists of a simulation platform for pollutant load calculation and a pollutant load hierarchical allocation (PLHA) system. The simulation platform was developed by linking the Environmental Fluid Dynamics Code (EFDC) and Water Quality Analysis Simulation Program (WASP). In the PLHA, pollutant loads were allocated top-down in several levels based on characteristics of the pollutant sources. Different allocation methods could be used for the different levels with the advantages of each method combined over the entire allocation. Zhushan Bay of Taihu Lake, one of the most eutrophic lakes in China, was selected as a case study. The allowable loads of total nitrogen, total phosphorus, ammonia, and chemical oxygen demand were found to be 2122.2, 94.9, 1230.4, and 5260.0 t·yr~(-1), respectively. The PLHA for the case study consists of 5 levels. At level 0, loads are allocated to those from the lakeshore direct drainage, atmospheric deposition, internal release, and tributary inflows. At level 1 the loads allocated to tributary inflows are allocated to the 3 tributaries. At level 2, the loads allocated to one inflow tributary are allocated to upstream areas and local sources along the tributary. At level 3, the loads allocated to local sources are allocated to the point and non-point sources from different towns. At level 4, the loads allocated to non-point sources in each town are allocated to different villages. Compared with traditional forms of pollutant load allocation methods, PLHA can combine the advantages of different methods which put different priority weights on equity and efficiency, and the PLHA is easy to understand for stakeholders and more flexible to adjust when applied in practical cases.
机译:开发了环境容量管理(ECM)系统,以帮助在中国高度富营养化的湖泊中为关键海湾实际实施总最大日负荷(TMDL)。 ECM系统由一个用于污染物负荷计算的仿真平台和一个污染物负荷分级分配(PLHA)系统组成。该仿真平台是通过将环境流体动力学规范(EFDC)和水质分析仿真程序(WASP)链接在一起而开发的。在PLHA中,根据污染物来源的特征从上至下按几个级别分配了污染物负荷。可以将不同的分配方法用于不同的级别,每种方法在整个分配过程中的优势结合在一起。案例研究选择了中国最富营养的湖泊之一的太湖竹山湾。总氮,总磷,氨和化学需氧量的允许负荷分别为2122.2 t·yr〜(-1),94.9、1230.4和5260.0 t·yr〜(-1)。案例研究的PLHA分为5个级别。在第0级,负荷分配给来自湖岸直接排水,大气沉积,内部释放和支流流入的负荷。在1级,分配给支流流量的负荷分配给3个支流。在级别2,分配给一个流入支流的负载分配给支流的上游区域和本地源。在级别3,分配给本地源的负载分配给来自不同城镇的点源和非点源。在级别4,分配给每个镇中非点源的负载分配给不同的村庄。与传统形式的污染物负荷分配方法相比,PLHA可以结合不同方法的优点,这些方法对公平性和效率具有不同的优先权重,并且PLHA对利益相关者很容易理解,在实际应用中可以灵活调整。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号