Leveling and thixotropic characteristics of concentrated zirconia inks for screen-printing

摘要

Screen-printing is a cost-effective method for the mass manufacture of zirconia-based solid oxide fuel cells (SOFCs) and oxygen separation membranes. The present work outlines an investigation into the leveling, thixotropic, and screen-printing characteristics of concentrated zirconia inks by a variety of rheological and imaging methods. A combination of viscosity, shear rate jump experiments, creep and recovery analysis, and yield stress measurements were used to assess ink thixotropy. Oscillatory rheometry and scanning electron microscopy/optical microscopy revealed a consistent effect of ethyl cellulose (binder) content upon the thixotropic and leveling characteristics of zirconia inks. While the yield stress (τ ₀), extent of recovery R(%), and rate of recovery (K) increase with increasing binder content, so did the surface roughness and thickness of the screen-printed films. Increasing the binder content not only increases the network strength of the thick films but also leads to increased leveling time. As a result, rheological modifiers are proposed to be necessary to improve the leveling characteristics of zirconia inks without losing the green strength of the thick films. Keywords Inks - Thixotropy - Yield stress - Leveling - Coatings