...
首页> 外文期刊>Renewable energy >Lipase-PDA-TiO_2 NPs: An emphatic nano-biocatalyst for optimized biodiesel production from Jatropha curcas oil
【24h】

Lipase-PDA-TiO_2 NPs: An emphatic nano-biocatalyst for optimized biodiesel production from Jatropha curcas oil

机译:脂肪酶-PDA-TiO_2 NPS:一种强调的纳米生物催化剂,用于从麻风树Curcas油的优化生物柴油生产

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Current study was designed for developing the novel nano-biocatalyst (Lipase-PDA-TiO2 NPs) for enzymatic transesterification of Jatropha curcas seed oil (JCSO). The TiO2 NPs were prepared by the hydrothermal method and were afterward modified by the polydopamine (PDA) polymer. The synthesized nanomaterial was characterized by SEM, FTIR, XRD and energy dispersive X-ray spectroscopy. Lipase activity assay was used to check the stability of immobilized enzyme under varying conditions of pH and temperature. Transesterification of JCSO using Lipase-PDA-TiO2 NPs catalyst was optimized by response surface methodology (RSM). Optimum biodiesel yield (92%) was achieved by carrying out the transesterification process for 30 h at 37 degrees C temperature with 10% nano-biocatalyst concentration, 6:1 methanol:oil ratio and 0.5% water content. On the basis of model significance, R-2 value, lack of fit test and predicted vs. actual values, quadratic model was selected as the best fitted model. The FTIR technique was utilized to monitor the transesterification process. The comparison of the physiochemical characteristics of the synthesized biodiesel with the international standard for bio-fuel affirms that the transesterification of JCSO in the presence of the nano-biocatalyst provides an effective alternative for the production of biodiesel. (C) 2021 Elsevier Ltd. All rights reserved.
机译:目前的研究是为开发新型纳米生物催化剂(脂肪酶-PDA-TiO2 NPS)的酶促酯交换,用于酶促酯交换酯化的酶促酯化酯化晶油(JCSO)。通过水热法制备TiO2 NPS,由多氨基胺(PDA)聚合物之后改性。合成的纳米材料的特征在于SEM,FTIR,XRD和能量分散X射线光谱。使用脂肪酶活性测定检查固定化酶在不同的pH和温度条件下的稳定性。使用脂肪酶-PDA-TiO2 NPS催化剂的JCSO酯交换通过响应表面方法(RSM)进行了优化。通过以10%纳米生物催化剂浓度,6:1甲醇:油比和0.5%含水量,通过在37℃温度下进行30小时来实现最佳生物柴油产率(92%)。在模型意义的基础上,R-2值,缺乏拟合试验和预测的与实际值,选择了二次模型作为最佳安装模型。使用FTIR技术监测酯交换过程。合成生物柴油与生物燃料国际标准的物理化学特性的比较确认JCSO在纳米生物催化剂存在下的酯交换提供了生物柴油生产的有效替代方案。 (c)2021 elestvier有限公司保留所有权利。

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号