...
首页> 外文期刊>Quality Control, Transactions >Multichannel Ultrasound Focusing Delay Control Method Based on Variable-Length Shift Register for Airborne Ultrasound Tactile Feedback
【24h】

Multichannel Ultrasound Focusing Delay Control Method Based on Variable-Length Shift Register for Airborne Ultrasound Tactile Feedback

机译:基于空机超声触觉反馈的可变长度移位寄存器的多通道超声聚焦延迟控制方法

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

This paper presents a multichannel ultrasound focusing delay control method based on a variable-length shift register to solve the problem of using counters that occupy more resources. The proposed method can realize the delay control of the driving signal of each transducer of an ultrasound array and achieve ultrasound focusing. While collecting and storing the input data, the shift register moves the stored data to the right, and the delay control of driving signals of all the channels can start simultaneously by controlling the enabling time of the input signal of the shift register. Using experiments, it is verified that the error of the proposed method is related to the frequency of the delay control clock; the higher the frequency of the delay control clock is, the smaller the error and the diameter of the focal point are. The proposed method uses only one shift register to achieve ultrasound focusing without using additional hardware circuits and thus occupies fewer system resources. The proposed method can be applied in the human-computer interaction, virtual reality, and augmented reality fields.
机译:本文介绍了一种基于可变长度移位寄存器的多通道超声聚焦延迟控制方法,以解决占用更多资源的计数器的问题。该方法可以实现超声阵列的每个换能器的驱动信号的延迟控制,实现超声波聚焦。在收集和存储输入数据的同时,移位寄存器将存储的数据移动到右侧,并且通过控制移位寄存器的输入信号的启用时间来同时启动所有信道的驱动信号的延迟控制。使用实验,验证所提出的方法的误差与延迟控制时钟的频率有关;延迟控制时钟的频率越高,误差越小,焦点的直径是。所提出的方法仅使用一个移位寄存器来实现超声波聚焦而不使用额外的硬件电路,从而占据更少的系统资源。所提出的方法可以应用于人机交互,虚拟现实和增强现实领域。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号