OFF-LINE QUALITY CONTROL FOR V-PROCESS CASTINGS

摘要

In the present work Taguchi's approach has been applied to the V-process castings of Al-11 per cent Si alloy to acertain the most influential control factors which will provide better and consistent surface finish to the castings regardless of the noise factors present. The control factors of the V-process that may affect the quality of the castings are the molding sand, vibration frequency, vibrating time, degree of vacuum imposed, and pouring temperature. In order to understand how these factors affect the surface roughness of the V-process castings, response surface methodology has been applied, and to obtain the optimal setting of the control factors Taguchi's method has been used. It is found that the pouring temperature has a significant effect on the surface roughness of Al-11 per cent Si alloy castings made by a V-process. Thus the pouring temperature must be kept at the lower level. All other factors are insignificant. Therefore, any setting of the insignificant factors/ variables that give the minimum cost can be used.