Realization of Flexible Plasma Display Panels on PET Substrates

摘要

DC plasma display panels are fabricated on flexible polyethylene terephtalate (PET) substrates. Each pixel consists of laterally placed anode and cathode electrodes. All electrical elements are formed on a single PET substrate, whereas a second substrate is needed to encapsulate the panel. Silver is used as the metal for each electrode and standard photolithography is used to form each cell. A 150-μm-thick layer of a UV-curable polymeric adhesive was used to form barrier ribs to both electrically isolate neighboring cells and to encapsulate the plasma. Conversion of vacuum UV into visible light is possible by blast-embedding of proper phosphor grains into the top substrate. The current-voltage and turn-on voltage versus pressure characteristics are examined. Effect of curvature on turn-on voltage is addressed.