Fault Location for Single-Circuit Line Based on Bus-Impedance Matrix Utilizing Voltage Measurements

摘要

Diverse transmission line fault location algorithms have been proposed in the past depending on measurements available. Existing algorithms usually require measurements captured from buses of a faulted line. By taking advantage of the bus-impedance matrix technique, this paper presents a possible fault location approach for single-circuit lines utilizing only voltage measurements from one or two buses, which may be distant from the faulted line. With the addition of a fictitious bus where the fault occurs, the transfer impedances of this bus and other buses are revealed as a function of the fault location. Based on the relationship between the bus voltage change due to fault and the transfer impedance, the fault location can be derived. Shunt capacitance of the line is ignored first and then fully considered based on distributed parameter line model. ElectroMagnetic Transients Program simulation studies have shown quite encouraging results.