...
首页> 外文期刊>Polymer Degradation and Stability >Synthesis, characterization and enzymatic degradation of novel biodegradable copolymers of 5-allyloxy-1,3-dioxan-2-one with e-caprolactone
【24h】

Synthesis, characterization and enzymatic degradation of novel biodegradable copolymers of 5-allyloxy-1,3-dioxan-2-one with e-caprolactone

机译:5-烯丙氧基-1,3-二恶烷-2-酮与ε-己内酯的新型可生物降解共聚物的合成,表征和酶促降解

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Ring-opening copolymerization of 5-allyIoxy-1,3-dioxan-2-one (ATMC) with e-caprolactone (CL) was successfully performed for the first time in bulk at 140℃ using Sn(Oct)_2 as the catalyst. Novel biodegradable copolymers with different compositions were characterized by 1H NMR, GPC, DSC, X-ray diffraction and static contact angle method. The copolymer composition was relevant to the monomer feed ratio, while the ATMC incorporation in the copolymers was less than that in the feed. With the increase of ATMC molar feed ratio from 25% to 75%, the M_n of the resulting copolymers decreased from 30,500 to 14,300 g/mol, while the static contact angle of the copolymers increased from 92.7° to 98.2°. The relationship between the copolymer glass transition temperature and composition was in agreement with the Fox equation. In vitro cytotoxicity studies using MTT assay demonstrated that the copolymer had low cytotoxicity compared to poly(e-caprolactone) (PCL). Moreover, solution cast films were allowed to degrade in a pH 7.4 phosphate buffer solution containing Pseudomonas lipase. Weight loss data showed that the copolymers with ATMC content higher than 46% were not degradable and the enzymatic degradation rate increased with CL content. The areas of the diffraction peaks decreased gradually with increasing degradation time according to XRD analysis. Little changes of molecular weight can be detected during enzymatic degradation, in agreement with a surface erosion mechanism shown by SEM.
机译:使用Sn(Oct)_2作为催化剂,在140℃下首次成功进行了5-allyIoxy-1,3-dioxan-2-one(ATMC)与e-己内酯(CL)的开环共聚。通过1 H NMR,GPC,DSC,X射线衍射和静态接触角方法对具有不同组成的新型可生物降解共聚物进行了表征。共聚物组成与单体进料比例有关,而共聚物中的ATMC掺入量少于进料中的掺入量。随着ATMC摩尔进料比从25%增加到75%,所得共聚物的M_n从30,500 g / mol降低至14,300 g / mol,而共聚物的静态接触角从92.7°增加至98.2°。共聚物玻璃化转变温度与组成之间的关系与Fox方程一致。使用MTT分析的体外细胞毒性研究表明,与聚(ε-己内酯)(PCL)相比,该共聚物具有较低的细胞毒性。此外,使溶液流延膜在含有假单胞菌脂肪酶的pH 7.4磷酸盐缓冲溶液中降解。失重数据表明,ATMC含量高于46%的共聚物不可降解,酶降解率随CL含量的增加而增加。根据XRD分析,随着降解时间的增加,衍射峰的面积逐渐减小。在酶促降解过程中,几乎没有检测到分子量变化,这与SEM显示的表面腐蚀机理一致。

著录项

  • 来源
    《Polymer Degradation and Stability》 |2013年第1期|325-330|共6页
  • 作者

    Tao Jiang; Feng He; Ren-Xi Zhuo;

  • 作者单位

    Key Laboratory of Biomedical Polymers of Ministry of Education, Department of Chemistry, Wuhan University, Wuhan 430072, China;

    Key Laboratory of Biomedical Polymers of Ministry of Education, Department of Chemistry, Wuhan University, Wuhan 430072, China;

    Key Laboratory of Biomedical Polymers of Ministry of Education, Department of Chemistry, Wuhan University, Wuhan 430072, China;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    poly(ε-caprolactone); polycarbonates; enzymatic degradation; cytotoxicity;

    机译:聚(ε-己内酯);聚碳酸酯酶促降解;细胞毒性;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号