Development of a 4-MV, 80-kA-Induction Voltage Adder for Flash X-ray Radiography

摘要

An induction voltage adder (IVA) has been developed to drive rod-pinch diodes (RPDs), to produce X-rays for flash radiography. The IVA facility consists of four-stage induction cavities stacked in series, each of which is single-point driven by a 6-Omega pulseline. The prime pulsed-power source comprises two Marx generators and four de-ionized water pulselines. Each Marx generator fast charges two pulselines to about 2.2 MV in less than 370 ns. Four electrically triggered, SF6-insulated gas switches serve as energy-transfer switches from pulse-forming lines to output transmission lines, and thus without an additional intermediate energy storage. A stepped inner stalk is utilized to make the vacuum impedance of the secondary transmission line increase from 30 Omega at the first cavity to 120 Omega at the last cavity, to prevent the electron emission from cathode surfaces. The RPD is chosen to create bremsstrahlung X-rays, which are believed to be optimal at voltage levels of about 4 MV. In this article, the design details and experimental results concerning the main components, such as the Marx/PFLs, IVA, and RPD, are demonstrated. The electrical performances of the facility are characterized. Presently, the IVA provides voltages of up to 4.3 MV and currents of up to 85 kA. The X-ray dose is up to 15.5 Rad [lithium fluoride (LiF)] at 1 m with a spot size of 1.4 mm and a FWHM time of 55 ns.