首页> 外文期刊>Planetary and space science >Thermal observations of Saturn's main rings by Cassini CIRS: Phase, emission and solar elevation dependence
【24h】

Thermal observations of Saturn's main rings by Cassini CIRS: Phase, emission and solar elevation dependence

机译:卡西尼CIRS对土星主圈的热观测:相位,发射和太阳高度依赖性

获取原文
获取原文并翻译 | 示例
           

摘要

Two and a half years after Saturn orbit insertion (SOI) the Cassini composite infrared spectrometer (CIRS) has acquired an extensive set of thermal measurements (including physical temperature and filling factor) of Saturn's main rings for a number of different viewing geometries, most of which are not available from Earth. Thermal mapping of both the lit and unlit faces of the rings is being performed within a multidimensional observation space that includes solar phase angle, spacecraft elevation and solar elevation. Comprehensive thermal mapping is a key requirement for detailed modeling of ring thermal properties. To first order, the largest temperature changes on the lit face of the rings are driven by variations in phase angle while differences in temperature with changing spacecraft elevation are a secondary effect. Ring temperatures decrease with increasing phase angle suggesting a population of slowly rotating ring particles [Spilker, L.J., Pilorz, S.H., Wallis, B.D., Pearl, J.C., Cuzzi, J.N., Brooks, S.M., Altobelli, N., Edgington, S.G., Showalter, M., Michael Flasar, F., Ferrari, C, Leyrat, C. 2006. Cassini thermal observations of Saturn's main rings: implications for particle rotation and vertical mixing. Planet. Space Sci. 54, 1167-1176, doi: 10.1016/j.pss.2006.05.033], Both lit A and B rings show that temperature decreases with decreasing rings solar elevation while temperature changes in the C ring and Cassini Division are more muted. Variations in the geometrical filling factor, β, are primarily driven by changes in spacecraft elevation. For the optically thinnest region of the C ring, β variations are found to be nearly exclusively determined by spacecraft elevation. Both a multilayer and a monolayer model provide an excellent fit to the data in this region. In both cases, a ring infrared emissivity > 0.9 is required, together with a random and homogeneous distribution of the particles. The interparticle shadowing function required for the monolayer model is very well constrained by our data and matches experimental measurements performed by Froidevaux [1981a. Saturn's rings: infrared brightness variation with solar elevation. Icarus 46, 4-17].
机译:在土星轨道插入(SOI)两年半之后,卡西尼号复合红外光谱仪(CIRS)已获得了土星主环针对多种不同观察几何形状的广泛的热测量值(包括物理温度和填充因子)地球上没有这些。在包含太阳相位角,航天器标高和太阳标高的多维观测空间内,对环的被照亮和未照亮面进行热成像。全面的热映射是对环热性能进行详细建模的关键要求。首先,环的受光面的最大温度变化是由相角变化引起的,而随着航天器高度的变化,温度差是次要影响。环温度随相角的增加而降低,表明存在缓慢旋转的环颗粒[Spilker,LJ,Pilorz,SH,Wallis,BD,Pearl,JC,Cuzzi,JN,Brooks,SM,Altobelli,N.,Edgington,SG,Showalter ,M.,Michael Flasar,F。,法拉利,C,Leyrat,C。2006。卡西尼号对土星主环的热观测:对粒子旋转和垂直混合的影响。行星。太空科学5,14,1167-1176,doi:10.1016 / j.pss.2006.05.033],点亮的A和B环均显示温度随环太阳高度的降低而降低,而C环和卡西尼分部的温度变化更弱。几何填充因子β的变化主要是由航天器高度的变化引起的。对于C环的光学上最薄的区域,发现β变化几乎完全由航天器的高度确定。多层模型和单层模型都非常适合该区域中的数据。在这两种情况下,都要求环状红外发射率> 0.9,以及颗粒的随机且均匀分布。单层模型所需的粒子间阴影功能非常受我们的数据约束,并且与Froidevaux [1981a。土星环:红外亮度随太阳高度而变化。伊卡洛斯46,4-17]。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号