首页> 外文期刊>Photovoltaics, IEEE Journal of >Antireflection Coating Design for Triple-Junction III–V/Ge High-Efficiency Solar Cells Using Low Absorption PECVD Silicon Nitride
【24h】

Antireflection Coating Design for Triple-Junction III–V/Ge High-Efficiency Solar Cells Using Low Absorption PECVD Silicon Nitride

机译:使用低吸收性PECVD氮化硅的三结III–V / Ge高效太阳能电池的减反射涂层设计

获取原文
获取原文并翻译 | 示例
           

摘要

The design of antireflection coating (ARC) for multijunction solar cells is challenging due to the broadband absorption and the need for current matching of each subcell. Silicon nitride, which is deposited by plasma-enhanced chemical vapor deposition (PECVD) using standard conditions, is widely used in the silicon wafer solar cell industry but typically suffers from absorption in the short-wavelength range. We propose the use of silicon nitride deposited by low-frequency PECVD (LFSiN) optimized for high refractive index and low optical absorption as a part of the ARC design for III–V/Ge triple-junction solar cells. This material can also act as a passivation/encapsulation coating. Simulations show that the SiO$_{{rm 2}}$ /LFSiN double-layer ARC can be very effective in reducing the reflection losses over the wavelength range of the limiting subcell for top subcell-limited, as well as middle subcell-limited, triple-junction solar cells. We also demonstrate that the structure’s performance is stable over expected variations in the layer parameters (thickness and refractive index) in the vicinity of the optimal values.
机译:由于宽带吸收以及每个子电池需要电流匹配,因此用于多结太阳能电池的减反射涂层(ARC)的设计具有挑战性。使用标准条件通过等离子体增强化学气相沉积(PECVD)沉积的氮化硅广泛用于硅晶片太阳能电池行业,但通常会遭受短波长范围的吸收。我们建议使用通过低频PECVD(LFSiN)沉积的氮化硅,将其优化用于高折射率和低光吸收,作为III–V / Ge三结太阳能电池ARC设计的一部分。该材料还可以用作钝化/封装涂层。仿真表明,SiO $ _ {{rm 2}} $ / LFSiN双层ARC可以非常有效地减少顶部子电池受限以及中间子电池受限的限制子电池在整个波长范围内的反射损耗,三结太阳能电池。我们还证明,在最佳值附近,在层参数(厚度和折射率)的预期变化下,结构的性能稳定。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号