首页> 外文期刊>Photonic network communications >Performance of improved X-axis auto-alignment and detection for single-channel FSO system
【24h】

Performance of improved X-axis auto-alignment and detection for single-channel FSO system

机译:单通道FSO系统的改进X轴自动对准和检测性能

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

A precise alignment between point-to-point free space optical (FSO) networks is crucial in order to maximize the performance of data transmission. A sway or low-frequency vibration of FSO base station can affect line-of-sight quality and hence may lead to the occurrence of higher BER. Therefore, the work presented in this paper is to demonstrate an improved auto-alignment single-channel FSO transmission system at X-axis detection area. The receiver base station was fed with pulsed signal laser from a tunable laser source with a central wavelength of 1550 nm. The detection mechanism responds from an analog input signal received that corresponds to the X-axis direction of transmitter vibration. The detection performance of the system was observed by using two approaches: auto-searching of artificial intelligence (AI) detection with stop command and without stop command. The obtained results indicate that the bit sequence of the pulsed signal has low loss by implementing the auto-searching of AI detection with stop command features and hence improves the efficiency of the overall FSO transmission system.
机译:点对点自由空间光(FSO)网络之间的精确对齐对于最大化数据传输性能至关重要。 FSO基站的摇摆或低频振动会影响视线质量,因此可能导致更高的BER发生。因此,本文提出的工作是在X轴检测区域演示一种改进的自动对准单通道FSO传输系统。接收器基站接收了来自中心波长为1550 nm的可调激光源的脉冲信号激光。检测机构从接收到的与变送器振动的X轴方向相对应的模拟输入信号作出响应。通过两种方法观察系统的检测性能:带停止命令和不带停止命令的自动搜索人工智能(AI)检测。获得的结果表明,通过实现具有停止命令特征的AI检测的自动搜索,脉冲信号的比特序列具有低损耗,从而提高了整个FSO传输系统的效率。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号