首页> 外文期刊>Optics and Lasers in Engineering >Adaptive mask generating algorithm based on the fuzzy set theory for the weighted least-squares phase unwrapping
【24h】

Adaptive mask generating algorithm based on the fuzzy set theory for the weighted least-squares phase unwrapping

机译:基于模糊集理论的自适应掩模生成算法对加权最小二乘局展开的基础

获取原文
获取原文并翻译 | 示例
           

摘要

In the digital speckle pattern interferometry (DSPI), accurate phase unwrapping is essential for quantitative phase measurement. In this paper, a novel adaptive mask generating algorithm based on the fuzzy set theory is proposed, which can automatically calculate an optimal threshold for the reliability masked weighted least-squares phase unwrapping. The reliability map of a wrapped phase map is firstly calculated based on the second differences of each pixel. Then, the fuzzy interval of the threshold is determined according to reliability values of the residues and standard deviation of the reliability map, and a membership function describing the fuzzy threshold is established to map the reliability values to the interval of [0, 1]. At last, the membership matrix is used to perform weighted average processing on the reliability map to automatically calculate the optimal threshold for generating a 0-1 mask. Two sets of simulated phase maps under different noise levels and fringe abnormal conditions are generated to evaluate and the accuracy of the adaptive threshold and the performance of the proposed algorithm. Experimental phase data of deformation dynamic measurement in DSPI is adopted to verify the effectiveness of the proposed algorithm. Simulation and experimental results show that the algorithm can adaptively calculate an optimal threshold of different wrapped phase maps, which is very close to the threshold elaborately selected by manual intervention, and can provide a reliable and accurate unwrapping phase for actual phase measurement.
机译:在数字散斑图案干涉测量(DSPI)中,精确的相位展开对于定量相位测量至关重要。在本文中,提出了一种基于模糊集理论的新型自适应掩模生成算法,其可以自动计算可靠性屏蔽加权最小二乘相位展开的最佳阈值。首先基于每个像素的第二差异来计算包裹相位图的可靠性图。然后,根据可靠性地图的残基的可靠性值和标准偏差确定阈值的模糊间隔,并且建立描述模糊阈值的隶属函数以将可靠性值映射到[0,1]的间隔。最后,隶属矩阵用于对可靠性映射执行加权平均处理,以自动计算用于生成0-1掩模的最佳阈值。产生不同噪声水平和边缘异常条件下的两组模拟相位图以评估自适应阈值的准确性和所提出的算法的性能。采用DSPI中变形动态测量的实验相位数据来验证所提出的算法的有效性。仿真和实验结果表明,该算法可以自适应地计算不同包装相位的最佳阈值,这非常接近通过手动干预选择的精心选择的阈值,并且可以为实际相位测量提供可靠且准确的展开阶段。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号