Simulation and experiment studies of aberration effects on the measurement of laser beam quality factor (M-2)

摘要

In the measurement system of beam quality factor, M-2, wave-front and intensity aberrations caused by optical elements, thermal effects, residual pump light, etc., influence the measurement results. The influence was analyzed using the angular spectrum and the finite element methods. Simulation of the impact of different aberrations, thermal effects and residual pump light on the measurement of the M-2 is provided. The M-2 of a high-power fiber laser is measured by a beam quality analyzer when the laser transmits through a high absorption red glass with different output power. The results from the experiment and the simulation have good consistency. The simulation and experiment results can be applied for the designs of high-power laser, laser beam quality measurement, and laser-launching systems. (C) 2017 Elsevier Ltd. All rights reserved.