...
首页> 外文期刊>Nukleonika >Montmorillonite modified by unsaturated compatibilizing agents and by ionizing radiation as a potential filler in polymeric composites
【24h】

Montmorillonite modified by unsaturated compatibilizing agents and by ionizing radiation as a potential filler in polymeric composites

机译:通过不饱和增容剂和电离辐射作为聚合物复合材料中潜在的填料改性的蒙脱土

获取原文
获取原文并翻译 | 示例

摘要

For last several years we have studied modifications of montmorillonite (MMT) with different agents and the structural changes resulting from the processes. The aim of present work was focused on the preparation of polymer composites from epoxy resin and dispersed phase modified chemically and subsequently activated by irradiation. The paper presents investigations concerning intercalation of MMT by the synthesized unsaturated organophilic agents (on the basis of quaternary ammonium salts). The process was studied by: wide-angle X-ray scattering (WAXS), Fourier--transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA); additionally mechanical properties of the polymer composite as well as its microscopic structure were tested. It was found that unsaturated quaternary ammonium salts can intercalate between MMT layers. The possibility of radiation-induced compatibilization between modified MMT particles and polymeric matrix was also studied. It was confirmed by electron paramagnetic resonance (EPR) spectroscopy that in the synthesized salts stable radicals are formed during irradiation, however their influence on mechanical properties of the final composite is insignificant.
机译:在过去的几年中,我们研究了蒙脱石(MMT)对不同试剂的改性以及由该过程引起的结构变化。当前工作的目标集中在由环氧树脂制备的聚合物复合材料上,并对分散相进行化学改性,然后通过辐照活化。本文介绍了有关合成的不饱和亲有机剂(基于季铵盐)嵌入MMT的研究。通过广角X射线散射(WAXS),傅立叶变换红外光谱(FTIR)和热重分析(TGA)研究了该过程。此外,还测试了聚合物复合材料的机械性能及其微观结构。发现不饱和季铵盐可插入MMT层之间。还研究了改性MMT颗粒与聚合物基体之间辐射诱导增容的可能性。通过电子顺磁共振(EPR)光谱证实,在合成盐中,在辐射过程中会形成稳定的自由基,但是它们对最终复合材料的机械性能的影响微不足道。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号