首页> 外文期刊>Nuclear fusion >Fast heating of fuel assembled in a spherical deuterated polystyrene shell target by counter-irradiating tailored laser pulses delivered by a HAMA 1 Hz ICF driver
【24h】

Fast heating of fuel assembled in a spherical deuterated polystyrene shell target by counter-irradiating tailored laser pulses delivered by a HAMA 1 Hz ICF driver

机译:通过反辐射HAMA 1 Hz ICF驱动器发出的定制激光脉冲来快速加热组装在球形氘代聚苯乙烯壳靶中的燃料

获取原文
获取原文并翻译 | 示例
           

摘要

Fast heating is a method of heating an assembled high-density plasma into a hot state by irradiating it with short-duration (sub-picosecond), high-intensity (>10~(18) W cm~(-2)) laser pulses before the plasma expands and dissolves hydrodynamically. In this paper, we present detailed experimental results of fast heating fuel assembled in a spherical deuterated polystyrene shell target of 500 μm diameter and 7 μm thickness with counterbeam illumination by using a HAMA 1 Hz, 5.9 J inertial confinement fusion laser driver with pulse tailoring. These tailored pulses contain three pulses in sequence: a "foot" pulse of 2.4 J/25 ns, a "spike" pulse of 0.5 J/300 ps and a "heater" pulse of 0.4 J/110 fs; these pulses are designed to assemble the fuel and heat it. By varying the energy of the foot pulse, we find that fast heating the fuel is achieved only if the fuel is weakly ablated by the foot pulse and then shock-assembled by the spike pulse into the target centre so that the heater pulse can access the fuel with a focal intensity greater than 10~(18) W cm~(-2). Without a foot pulse, the heater pulse contributes to assembling the fuel. For higher foot-pulse energies, the heater pulse drives a hydrodynamic motion with speeds of the order 10~7 cm s~(-1) with intensities of the order 10~(17) W cm~(-2), resulting in re-assembling and additional heating of the pre-assembled fuel. Once a shockassembled core is achieved at the target centre, we succeed qualitatively in fast heating the core for shots in sequence with variations of laser energy within 18%. The coupling efficiency from the heating laser to the core is inferred to be (10 ± 2)% in total: (8 ± 1.6)% for the ionized bulk electrons and (2 ± 0.4)% for the bulk ions. The fusion neutron spectrum detected on the laser axis exhibits peaks at 1.0 MeV, 1.7 MeV and 3.8 MeV. These peaks are attributed to the C(d, n)~(13)N and d(d, n)~3He reactions induced by counterpropagating fast deuterons accelerated by the photon pressure of the heating pulses.
机译:快速加热是一种通过用短时间(亚皮秒),高强度(> 10〜(18)W cm〜(-2))的激光脉冲辐照已组装的高密度等离子体使其达到热状态的方法在血浆膨胀并通过流体动力溶解之前。在本文中,我们通过使用带有脉冲调整功能的HAMA 1 Hz,5.9 J惯性约束聚变激光驱动器,对在直径为500μm且厚度为7μm的球形氘代聚苯乙烯壳靶中组装的快速加热燃料进行了详细的实验结果,该对射束照明。这些定制脉冲依次包含三个脉冲:2.4 J / 25 ns的“脚”脉冲,0.5 J / 300 ps的“尖峰”脉冲和0.4 J / 110 fs的“加热”脉冲;这些脉冲被设计用来聚集燃料并加热它。通过改变脚脉冲的能量,我们发现只有在脚脉冲对燃料进行微弱消融后,再由尖峰脉冲将其震荡组装到目标中心,加热器加热器才能访问燃料,才能实现对燃料的快速加热。聚焦强度大于10〜(18)W cm〜(-2)的燃料。没有脚脉冲,加热器脉冲有助于燃料的组装。对于更高的脚脉冲能量,加热器脉冲以10〜(17)W cm〜(-2)的强度驱动流体动力运动,速度约为10〜7 cm s〜(-1)。 -预组装燃料的组装和附加加热。一旦在目标中心安装了防震芯,我们就定性地成功地快速加热了芯以进行射击,并且激光能量的变化在18%以内。从加热激光器到纤芯的耦合效率据推测总共为(10±2)%:电离的体电子为(8±1.6)%,体离子为(2±0.4)%。在激光轴上检测到的聚变中子光谱在1.0 MeV,1.7 MeV和3.8 MeV处出现峰值。这些峰值归因于由加热脉冲的光子压力加速的快速氘核的反向传播引起的C(d,n)〜(13)N和d(d,n)〜3He反应。

著录项

  • 来源
    《Nuclear fusion》 |2017年第11期|116031.1-116031.14|共14页
  • 作者单位

    Graduate School for the Creation of New Photonics Industries, Hamamatsu, Shizuoka, Japan;

    Graduate School for the Creation of New Photonics Industries, Hamamatsu, Shizuoka, Japan,Toyota Technical Development Corp., Aichi, Toyota, Japan;

    Graduate School for the Creation of New Photonics Industries, Hamamatsu, Shizuoka, Japan;

    Graduate School for the Creation of New Photonics Industries, Hamamatsu, Shizuoka, Japan;

    Graduate School for the Creation of New Photonics Industries, Hamamatsu, Shizuoka, Japan;

    Graduate School for the Creation of New Photonics Industries, Hamamatsu, Shizuoka, Japan;

    Hamamatsu Photonics, K. K. Hamamatsu, Shizuoka, Japan;

    Hamamatsu Photonics, K. K. Hamamatsu, Shizuoka, Japan;

    Hamamatsu Photonics, K. K. Hamamatsu, Shizuoka, Japan;

    Hamamatsu Photonics, K. K. Hamamatsu, Shizuoka, Japan;

    Hamamatsu Photonics, K. K. Hamamatsu, Shizuoka, Japan;

    Advanced Material Engineering Div., TOYOTA Motor Corporation, Susono, Shizuoka, Japan;

    TOYOTA Central Research and Development Laboratories Inc., Nagakute, Aichi, Japan;

    Aichi Synchrotron Radiation Center, Seto, Aichi, Japan;

    Green Mobility Research Institute, Nagoya University, Aichi, Nagoya, Japan;

    Green Mobility Research Institute, Nagoya University, Aichi, Nagoya, Japan;

    Institute for Laser Technology, Nishi-ku, Osaka, Japan;

    Institute for Laser Engineering, Osaka University, Suita, Osaka, Japan;

    National Institute of Advanced Industrial Science and Technology, Ibaraki, Tsukuba, Japan;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);美国《生物学医学文摘》(MEDLINE);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    fast heating; fast ignition; ICF; ICF laser driver; neutron; ultra-intense laser;

    机译:快速加热;快速点火;ICF;ICF激光驱动器;中子;超强激光;

相似文献

  • 外文文献
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号