Mass velocity and cold-wall effects on critical heat flux in an advanced light water reactor

摘要

The characteristics of Critical Heat Flux (CHF) were investigated for a square array of rod bundles which could possibly be loaded into an integral-type advanced light water reactor. The parametric effects of the mass velocity and the unheated rod were examined by conducting CHF experiments with 5 x 5 test bundles in a Freon-loop. The influence of a cold wall on the CHF was interpreted by introducing a simple phenomenological model which accounts for the influence of a thermal mixing inside the boiling channel. A local parameter CHF correlation applicable to an integral-type reactor was developed from the CHF data base for square-arrayed rod bundles. The local thermal-hydraulic conditions calculated by the subchannel analysis code MATRA were used for the optimization of the correlation coefficients. Correction factors for the low mass velocity, spacer grids, and the non-uniform axial power shapes have been devised which reflected the results of the data assessment and the experimental observations. As a result of the thermal margin evaluation at steady state conditions, it was revealed that the integral-type reactor core has a greater DNBR margin than a typical 1000 MW_e PWR core.