CFD analysis of flow blockage phenomena in a LBE-cooled 19-pin wire-wrapped rod bundle

摘要

Flow blockage accident is a severe accident. When fuel assembly is partially or totally blocked, the heat transfer between coolant and cladding is significant impaired due to a rapid decrease of coolant flow, which leads to a local increase of cladding and coolant temperature and possibly results in a release of fission products. A recirculation region is formed downstream the blockage and a temperature peak can be found in this region. In this paper, CFD modelling and simulation for a LBE-cooled 19-pin wire-wrapped bundle were carried out to consider the influence from the flow blockage on the rod surface temperature and cross flow. Three-dimensional flow and temperature distributions of LBE were obtained using commercial CFD software. The influence from the blockage area and its location was investigated as well as the axial length of blockages. It was found that flow blockages in the center of bundle result in a higher surface temperature while comparing with blockages in the side sub-channels. The cross flow between sub-channels through gaps has been evaluated and their dependency on the blockage area is also evaluated based on CFD simulation results.