首页> 外文期刊>Nature >Subwavelength-diameter silica wires for low-loss optical wave guiding
【24h】

Subwavelength-diameter silica wires for low-loss optical wave guiding

机译:用于低损耗光波导的亚波长直径硅胶线

获取原文
获取原文并翻译 | 示例
       

摘要

Silica waveguides with diameters larger than the wavelength of transmitted light are widely used in optical communications, sensors and other applications. Minimizing the width of the waveguides is desirable for photonic device applications, but the fabrication of low-loss optical waveguides with subwavelength diameters remains challenging because of strict requirements on surface roughness and diameter uniformity. Here we report the fabrication of subwavelength-diameter silica 'wires' for use as low-loss optical waveguides within the visible to near-infrared spectral range. We use a two-step drawing process to fabricate long free-standing silica wires with diameters down to 50 nm that show surface smoothness at the atomic level together with uniformity of diameter. Light can be launched into these wires by optical evanescent coupling. The wires allow single-mode operation, and have an optical loss of less than 0.1 dB mm~(-1). We believe that these wires provide promising building blocks for future microphotonic devices with subwavelength-width structures.
机译:直径大于传输光波长的石英波导被广泛用于光通信,传感器和其他应用中。使光波导的宽度最小化对于光子装置应用是期望的,但是由于对表面粗糙度和直径均匀性的严格要求,具有亚波长直径的低损耗光波导的制造仍然具有挑战性。在这里,我们报告了亚波长直径二氧化硅“线”的制造,该线用作可见光到近红外光谱范围内的低损耗光波导。我们使用两步拉伸工艺来制造直径低至50 nm的长自立式硅胶线,该线在原子级上显示出表面光滑度以及直径的均匀性。可以通过optical逝光耦合将光发射到这些导线中。这些导线允许单模工作,并且光损耗小于0.1 dB mm〜(-1)。我们认为,这些导线为未来具有亚波长宽度结构的微光子器件提供了有希望的构建基块。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号