...
首页> 外文期刊>Mineral Processing and Extractive Metallurgy Review: An International Journal >Exploitation of Copper Bleed Stream for the Extraction and Recovery of Copper and Nickel by Bis(2,4,4-trimethylpentyl)phosphinic Acid
【24h】

Exploitation of Copper Bleed Stream for the Extraction and Recovery of Copper and Nickel by Bis(2,4,4-trimethylpentyl)phosphinic Acid

机译:双(2,4,4-三甲基戊基)次膦酸对铜和镍的萃取和回收利用

获取原文
获取原文并翻译 | 示例
           

摘要

Bleed streams from copper electrolysis/electrowinning processes potentially contain high amounts of acid, copper, and nickel which need an effective treatment before disposal. A systematic study was carried out to optimize the parameters for the extraction and recovery of metal values using bis(2,4,4-trimethylpentyl)phosphinic acid (Cyanex 272) diluted with kerosene. Since pH has a major role to play in the separation of Cu from Ni, a 60% saponified solvent was used for extraction studies. With an increase in equilibrium pH from 3.32 to 5.48 and extractant concentration from 5 to 20%, there is an increase in the percentage extraction of metal ions. With a solvent concentration of 20%, the separation factor for Cu with respect to Ni () increases from 39.1 to 118.8 with the increase in pH from 3.3 to 5.5. Loading capacity of 20% Cyanex 272 was found to be 30.8Â g/L Cu and 0.024Â g/L Ni. After scrubbing of coextracted Ni(II) with 15Â g/L H2SO4, the loaded organic containing 30.59Â g/L Cu(II) and 4Â ppm Ni(II) was stripped with 75Â g/L sulfuric acid. A McCabe-Thiele plot shows the requirement of two counter-current stages at an O:A ratio of 1:1 for extraction and two counter-current stages at O:A ratio of 2:1 for the stripping of copper. Results of the present investigation indicate the possibility of the use of saponified Cyanex 272 for the extraction, separation, and recovery of copper and nickel from the actual spent copper bleed streams.View full textDownload full textKeywordsbis(2,4,4-trimethylpentyl)phosphinic acid, copper(II), extraction, nickel(II), saponification, solvent extractionRelated var addthis_config = { ui_cobrand: "Taylor & Francis Online", services_compact: "citeulike,netvibes,twitter,technorati,delicious,linkedin,facebook,stumbleupon,digg,google,more", pubid: "ra-4dff56cd6bb1830b" }; Add to shortlist Link Permalink http://dx.doi.org/10.1080/08827508.2011.601481
机译:来自铜电解/电解沉积工艺的排气流中可能含有大量的酸,铜和镍,在处置之前需要进行有效的处理。进行了系统的研究以优化使用煤油稀释的双(2,4,4-三甲基戊基)次膦酸(Cyanex 272)提取和回收金属价值的参数。由于pH在从Ni分离Cu中起主要作用,因此将60%的皂化溶剂用于萃取研究。随着平衡pH从3.32增加到5.48,萃取剂浓度从5%增加到20%,金属离子的萃取百分比增加。在20%的溶剂浓度下,Cu相对于Ni()的分离系数从39.1增加到118.8,pH值从3.3增加到5.5。 20%的Cyanex 272的负载能力被发现是30.8 g / L铜和0.024 g / L镍。用15 g / LH 2 SO 4 洗涤共萃取Ni(II)后,加载的有机物含有30.59 g / L Cu(II)和4 ppm Ni(II )用75 g / L硫酸汽提。 McCabe-Thiele图显示,对于萃取,需要以O:A的比例为1:1的两个逆流阶段,对于以2:1的O:A的比例需要两个逆流阶段。本研究的结果表明,可以使用皂化的Cyanex 272从实际的废铜排出流中提取,分离和回收铜和镍。全文阅读关键词双(2,4,4-三甲基戊基)次膦酸酸,铜(II),萃取,镍(II),皂化,溶剂萃取相关变量add add_config digg,google,more“,发布号:” ra-4dff56cd6bb1830b“};添加到候选列表链接永久链接http://dx.doi.org/10.1080/08827508.2011.601481

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号