首页> 外文期刊>Military operations research >Comparison of high temperature oxidation of nanocrystalline FeCr alloy consolidated by spark plasma sintering and hot pressing
【24h】

Comparison of high temperature oxidation of nanocrystalline FeCr alloy consolidated by spark plasma sintering and hot pressing

机译:火花等离子体烧结与热压固结纳米晶FeCr合金高温氧化的比较

获取原文
获取原文并翻译 | 示例
           

摘要

The oxidation kinetics and microstructure characteristics of oxide scales thermally grown on the surface of developed FeCr alloy were investigated at 900 ℃. The influence of difference sintering technique, i.e. spark plasma sintering and hot pressing, to improve nanostructured alloy performance was studied. The La-implantation was also considered in this study. It was found that the SPS sintered sample showed better performance than the HP sintered sample. Moreover, it also found that a combining of La-implantation and nanostructured alloy was most beneficial. While nanostructured alloy reduced the oxidation rate, the La-implantation increased the Cr_2O_3 scale conductivity.
机译:研究了在900℃热生长在已开发的FeCr合金表面的氧化皮的氧化动力学和微观结构特征。研究了差异烧结技术(即火花等离子体烧结和热压)对提高纳米结构合金性能的影响。在这项研究中还考虑了La植入。发现SPS烧结的样品表现出比HP烧结的样品更好的性能。此外,还发现结合镧注入和纳米结构合金是最有益的。纳米结构合金降低了氧化速率,而La注入提高了Cr_2O_3尺度电导率。

著录项

  • 来源
    《Military operations research》 |2014年第2期|123-129|共7页
  • 作者单位

    Faculty of Mechanical and Manufacturing Engineering, Tun Hussein Onn University of Malaysia (UTHM), Batu Pahat, 86400 Johor, Malaysia;

    Faculty of Mechanical and Manufacturing Engineering, Tun Hussein Onn University of Malaysia (UTHM), Batu Pahat, 86400 Johor, Malaysia;

    Faculty of Mechanical and Manufacturing Engineering, Tun Hussein Onn University of Malaysia (UTHM), Batu Pahat, 86400 Johor, Malaysia;

    Faculty of Mechanical and Manufacturing Engineering, Tun Hussein Onn University of Malaysia (UTHM), Batu Pahat, 86400 Johor, Malaysia;

    Faculty of Mechanical and Manufacturing Engineering, Tun Hussein Onn University of Malaysia (UTHM), Batu Pahat, 86400 Johor, Malaysia;

    Product Development, Thermal Technology LLC, 1911 Airport Blvd., Santa Rosa, CA 95403, USA;

    National Nuclear Energy Agency (BATAN), Kawasan Puspiptek, Serpong, Tangerang, Banten Indonesia;

    National Nuclear Energy Agency (BATAN), Kawasan Puspiptek, Serpong, Tangerang, Banten Indonesia;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Nanocrystalline; FeCr; Spark plasma sintering; Hot pressing; Oxidation; Interconnect;

    机译:纳米晶铬铁火花等离子体烧结;热压;氧化;互连线;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号