首页> 外文期刊>Microwaves, Antennas & Propagation, IET >Penta-band antenna for global system for mobile communications/digital cellular system/personal communications service/universal mobile telecommunications system/wireless local area network operation in portable devices
【24h】

Penta-band antenna for global system for mobile communications/digital cellular system/personal communications service/universal mobile telecommunications system/wireless local area network operation in portable devices

机译:用于移动通信/数字蜂窝系统/个人通信服务/通用移动通信系统/便携式设备中无线局域网操作的全球系统的五频带天线

获取原文
获取原文并翻译 | 示例
       

摘要

This study presents a planar inverted-F antenna for penta-band operation in portable devices, in accordance with the following wireless communication standards: global system for mobile communications, digital cellular system, personal communications service, universal mobile telecommunications system, and wireless local area network. The proposed antenna consists of a folded planar radiator with two slots - a J-shaped and a rectangular one - suspended above a substrate partially covered with a ground plane, to which a printed radiating strip is connected. Multiple resonances excited in this structure generate the radiation bands of the antenna, covering all required frequency ranges. A parametric analysis is conducted with the aid of electromagnetic simulation in order to evaluate the influence of geometrical dimensions of the antenna on its performance. The fabricated antenna prototype exhibits overall dimensions of 45 mm x 90 mm x 6.6 mm, and the experimental 10 dB return-loss bands of the antenna are 869-966, 1653-2200, and 2390-2505 MHz, with a measured linearly polarised gain of 2.2 dB at 915 MHz, 2.0 dB at 1900 MHz, and 1.0 dB at 2450 MHz, on the principal cut planes. A good agreement is observed between simulated and experimental results.
机译:这项研究提出了一种符合以下无线通信标准的用于便携式设备中五频带操作的平面倒F型天线:全球移动通信系统,数字蜂窝系统,个人通信服务,通用移动电信系统和无线局域网网络。所提出的天线由一个折叠的平面辐射器组成,该辐射器具有两个槽(一个J形和一个矩形),悬挂在基板上,该基板部分覆盖有接地平面,印刷辐射带连接到该平面上。在这种结构中激发的多个共振会产生天线的辐射带,覆盖所有所需的频率范围。为了评估天线的几何尺寸对其性能的影响,借助电磁仿真进行了参数分析。制成的天线原型的整体尺寸为45 mm x 90 mm x 6.6 mm,天线的实验10 dB回波损耗频带为869-966、1653-2200和2390-2505 MHz,并具有测量的线性极化增益在主切割平面上,在915 MHz时为2.2 dB,在1900 MHz时为2.0 dB,在2450 MHz时为1.0 dB。在模拟和实验结果之间观察到很好的一致性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号