首页> 外文期刊>Microwaves, Antennas & Propagation, IET >Metal frame repeater antenna with partial slotted ground for bandwidth enhancement of wristband devices
【24h】

Metal frame repeater antenna with partial slotted ground for bandwidth enhancement of wristband devices

机译:金属框架中继器天线具有部分开槽的接地,可增强腕带设备的带宽

获取原文
获取原文并翻译 | 示例
           

摘要

This work proposes a metal frame wristband antenna for biomedical healthcare monitoring applications. The repeater antenna is supported by printed circuit board (PCB), surrounded by a metal frame with a planar size of 40 mm × 20 mm. By introducing a partial ground with two L-shaped cuts at the centre of the PCB, wideband performance can be achieved, ranging from 4.0 to 7.2 GHz in free space and 3.4 to 7.3 GHz on human body. For on-body application, it covers both the interference-free subset of the unlicensed 3.5-4.5 GHz ultra-wideband (UWB) and 5.725-5.875 GHz industrial scientific and medical (ISM) band. The UWB band is intended for near field communication with implanted device, while the ISM band is intended for far-field telemetry with monitoring station. Good agreement is obtained between measurements and simulations.
机译:这项工作提出了一种用于生物医学保健监测应用的金属框架腕带天线。直放站天线由印刷电路板(PCB)支撑,并由平面尺寸为40 mm×20 mm的金属框架围绕。通过在PCB的中心引入带有两个L形切口的局部接地,可以实现宽带性能,自由空间范围为4.0至7.2 GHz,人体则为3.4至7.3 GHz。对于人体应用,它涵盖了免许可的3.5-4.5 GHz超宽带(UWB)和5.725-5.875 GHz工业科学与医学(ISM)频带的无干扰子集。 UWB频段用于与植入设备进行近场通信,而ISM频段用于与监控站进行远场遥测。在测量和模拟之间获得了良好的一致性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号