...
首页> 外文期刊>Metals and Materials International >Thermoelectric properties of n-type Bi2Te2.7Se0.3 compounds prepared by spark plasma sintering
【24h】

Thermoelectric properties of n-type Bi2Te2.7Se0.3 compounds prepared by spark plasma sintering

机译:火花等离子体烧结制备n型Bi2 Te2.7 Se0.3 化合物的热电性能

获取原文
获取原文并翻译 | 示例

摘要

In this study, the thermoelectric properties of 0.1 wt.% Cdl2-doped n-type Bi2Te2.7Sb0.3 compounds, fabrieated by SPS in a temperature range of 250°C to 350°C, were characterized. The density of the compounds was increased to approximately 100% of the theoretical density by carrying out consolidation at 350°C. The Seebeck coefficient, thermal conductivity, and electrical resistivity were dependent on a hydrogen reduction process and the sintering temperature. The Seebeck coefficient and the electrical resistivity increased with the reduction process. Also, electrical resistivity decreased and thermal conductivity increased with sintering temperature. The results suggest that carrier density and mobility vary according to the reduction process and sintering temperature. The highest figure of merit, 1.93×10?3 K?1, was obtained for the compound consolidated at 350°C for 2 min.
机译:本文研究了在温度范围内用SPS制备的0.1 wt。%Cdl2 掺杂的n型Bi2 Te2.7 Sb0.3 化合物的热电性能。表征了250℃至350℃的温度。通过在350℃进行固结,化合物的密度增加到理论密度的大约100%。塞贝克系数,热导率和电阻率取决于氢还原过程和烧结温度。塞贝克系数和电阻率随着还原过程的增加而增加。另外,随着烧结温度的降低,电阻率降低而导热率提高。结果表明载体密度和迁移率根据还原过程和烧结温度而变化。对于在350°C固结2分钟的化合物,其最高品质因数为1.93×10?3 K?1

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号