Infrared Brazing of Ti50Ni50 Shape Memory Alloy and 316L Stainless Steel with Two Sliver-Based Fillers

Ren-Kae Shiue; Chia-Pin Chen; Shyi-Kaan Wu

首页> 外文期刊>Metallurgical and Materials Transactions A >Infrared Brazing of Ti50Ni50 Shape Memory Alloy and 316L Stainless Steel with Two Sliver-Based Fillers

【24h】

Infrared Brazing of Ti50Ni50 Shape Memory Alloy and 316L Stainless Steel with Two Sliver-Based Fillers

机译：Ti50Ni50形状记忆合金和316L不锈钢以及两个银基钎料的红外钎焊

获取原文

获取原文并翻译 | 示例

掌桥外文数据库（机构版） >>

开具论文收录证明 >>

文献代查 >>

页面导航

摘要
著录项
相似文献
相关主题

摘要

Dissimilar infrared brazing Ti50Ni50 and AISI 316L stainless steel using two silver-based fillers, Cusil-ABA and Ticusil, was evaluated. The shear strength of the Ticusil brazed joint is higher than that of the Cusil-ABA brazed one due to the formation of better fillet. The maximum shear strength of 237 MPa is obtained for the Ticusil joint brazed at 1223 K (950 °C) for 60 seconds. The presence of interfacial Ti-Fe-(Cu) layer is detrimental to the shear strength of all joints.

机译：对使用两种银基填料Cusil-ABA和Ticusil的异种红外钎焊Ti50Ni50和AISI 316L不锈钢进行了评估。 Ticusil钎焊接头的剪切强度比Cusil-ABA钎焊接头的剪切强度更高，这是因为形成了更好的圆角。 Ticusil接头在1223 K（950°C）钎焊60秒时获得的最大剪切强度为237 MPa。界面Ti-Fe-（Cu）层的存在不利于所有接头的剪切强度。

著录项

来源
《Metallurgical and Materials Transactions A》 |2015年第6期|2364-2371|共8页
作者
Ren-Kae Shiue; Chia-Pin Chen; Shyi-Kaan Wu;
展开▼
作者单位

Department of Materials Science and Engineering National Taiwan University">(1);

Department of Mechanical Engineering National Taiwan University">(2);

Department of Materials Science and Engineering National Taiwan University">(1);

Department of Mechanical Engineering National Taiwan University">(2);

展开▼
收录信息
原文格式 PDF
正文语种 eng
中图分类
关键词

相似文献

外文文献
中文文献
专利

1. Infrared Brazing of Ti50Ni50 Shape Memory Alloy and 316L Stainless Steel with Two Sliver-Based Fillers [J] . Shiue Ren-Kae, Chen Chia-Pin, Wu Shyi-Kaan Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science . 2015,第6期

机译：Ti50Ni50形状记忆合金和316L不锈钢以及两个银基钎料的红外钎焊
2. Infrared Brazing of Ti50Ni50 Shape Memory Alloy and Inconel 600 Alloy with Two Ag-Cu-Ti Active Braze Alloys [J] . Shiue Ren-Kae, Wu Shyi-Kaan, Yang Sheng-Hao Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science . 2017,第2期

机译：Ti50Ni50形状记忆合金的红外线钎焊和Inconel 600合金与两个Ag-Cu-Ti主动钎焊合金
3. Effects of silver based filler metals on microstructure and properties of laser brazed joints between TiNi shape memory alloy and stainless steel [J] . Li M.G., Sun D.Q., Qiu X.M., Science and Technology of Welding & Joining . 2007,第2期

机译：银基填充金属对TiNi形状记忆合金与不锈钢激光钎焊接头组织和性能的影响
4. Infrared Brazing Ti50Ni50 and Ti-15-3 Alloys Using Two Ag-based Fillers [C] . T. E. Yang, R. K. Shiue, S. K. Wu World conference on titanium . 2012

机译：使用两种银基填料的红外钎焊Ti50Ni50和Ti-15-3合金
5. Effect of Alloying Elements Addition to the Corrosion Property of 316L Stainless Steel based Alloys [D] . Rahman, Tahsin. 2018

机译：合金元素除316L不锈钢基合金腐蚀性能的影响
6. Infrared Brazed Joints of Ti50Ni50 Shape Memory Alloy and Ti-15-3 Alloy Using Two Ag-Based Fillers [O] . Chieh Lin, Ren-Kae Shiue, Shyi-Kaan Wu, 2019

机译：使用两种基于Ag的填料的Ti50Ni50形状记忆合金和Ti-15-3合金的红外钎焊接头
7. Infrared brazing of TiNi shape memory alloy and 316L stainless steel with Au-22Ni-8Pd filler [O] . 2015

机译：TiNi形状记忆合金和316L不锈钢与Au-22Ni-8Pd填料的红外钎焊
8. PDS 1-5. Divertor heat sink materials pre- and post-neutron irradiation. Tensile and fatigue tests of brazed joints of molybdenum alloys and 316L stainless steel [R] . Lind, A. 1994

机译：pDs 1-5。中子辐照前后的转向散热片材料。钼合金和316L不锈钢钎焊接头的拉伸和疲劳试验

Infrared Brazing of Ti50Ni50 Shape Memory Alloy and 316L Stainless Steel with Two Sliver-Based Fillers

摘要

著录项

相似文献

相关主题

期刊订阅