...
首页> 外文期刊>Mechanical systems and signal processing >Uncertainty quantification of the Modal Assurance Criterion in operational modal analysis
【24h】

Uncertainty quantification of the Modal Assurance Criterion in operational modal analysis

机译:运算模态分析中模态保障准则的不确定性量化

获取原文
获取原文并翻译 | 示例
           

摘要

The Modal Assurance Criterion (MAC) is a modal indicator designed to decide whether the mode shapes used in its computation are corresponding to the same mode. During structural monitoring, it can be applied to evaluate changes in the mode shapes. When the mode shapes are estimated from measurement data, the MAC inherits their statistical properties, thus is afflicted with statistical uncertainty. The evaluation of this uncertainty is particularly relevant when the MAC estimate is close to 1, where 1 indicates equal mode shapes. In structural monitoring, it can be used to assess changes in mode shapes after early damage. While the framework for uncertainty quantification of modal parameters is well-known and developed in the context of subspace-based system identification methods, uncertainty quantification for the MAC has not been developed yet. A particular challenge for its statistical characterization is its boundedness in the interval between 0 and 1. In this paper it is shown that this boundedness yields two different distributions of the MAC estimates. The MAC computed between estimates of different mode shapes is inside the interval (0.1), and a Gaussian approximation of its distribution is obtained. When the MAC is computed between estimates of equal mode shapes, the resultant MAC estimate is close to 1, and the classical Gaussian approximation is inadequate. In this case it is shown that the MAC estimate is linked to a quadratic form of the mode shapes, whose distribution can be approximated by a scaled and shifted x~2 distribution. For both cases, uncertainty bounds related to the MAC estimates are established. The proposed frameworks are validated by extensive Monte Carlo simulations and then applied to evaluate mode shape changes due to damage during monitoring of the S101 Bridge.
机译:模态保证标准(MAC)是旨在确定其计算中使用的模式形状是否对应于相同模式的模态指示符。在结构监测期间,可以应用于评估模式形状的变化。当从测量数据估计模式形状时,MAC继承其统计属性,因此患有统计不确定性。当MAC估计接近1时,对该不确定性的评估特别相关,其中1表示等于模式形状。在结构监测中,它可用于在早期损坏后评估模式形状的变化。虽然在基于子空间的系统识别方法的上下文中,用于不确定度量的不确定度量的框架是众所周知的,并且在基于子空间的系统识别方法的上下文中,但尚未开发MAC的不确定性量化。对于其统计表征的特定挑战是其在0和1之间的间隔中的有界性。在本文中,示出该界限产生两种不同的MAC估计分布。在不同模式形状的估计之间计算的MAC在间隔内(0.1),并且获得其分布的高斯近似。当在等于模式形状的估计之间计算MAC时,得到的MAC估计接近1,并且经典高斯近似是不充分的。在这种情况下,示出了MAC估计与模式形状的二次形式链接,其分布可以通过缩放和移位的X〜2分布近似。对于这两种情况,建立了与MAC估计相关的不确定性界限。通过广泛的蒙特卡罗模拟验证所提出的框架,然后应用于评估S101桥期间损坏的模式形状变化。

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号