首页> 外文期刊>Mathematical Problems in Engineering >A Novel Sliding Mode Control Framework for Electrohydrostatic Position Actuation System
【24h】

A Novel Sliding Mode Control Framework for Electrohydrostatic Position Actuation System

机译:静液压位置致动系统的新型滑模控制框架

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

A novel sliding mode control (SMC) design framework is devoted to providing a favorable SMC design solution for the position tracking control of electrohydrostatic actuation system (EHSAS). This framework is composed of three submodules as follows: a reduced-order model of EHSAS, a disturbance sliding mode observer (DSMO), and a new adaptive reaching law (NARL). First, a reduced-order model is obtained by analyzing the flow rate continuation equation of EHSAS to avoid the use of a state observer. Second, DSMO is proposed to estimate and compensate mismatched disturbances existing in the reduced-order model. In addition, a NARL is developed to tackle the inherent chattering problem of SMC. Extensive simulations are conducted compared with the wide adoption of three-loop PID method on the cosimulation platform of EHSAS, which is built by combining AMESim with MATLAB/Simulink, to verify the feasibility and superiority of the proposed scheme. Results demonstrate that the chattering can be effectively attenuated, and the mismatched disturbance can be satisfyingly compensated. Moreover, the transient performance, steady-state accuracy, and robustness of position control are all improved.
机译:一种新颖的滑模控制(SMC)设计框架致力于为电动静液压致动系统(EHSAS)的位置跟踪控制提供良好的SMC设计解决方案。该框架由以下三个子模块组成:EHSAS的降阶模型,扰动滑模观察器(DSMO)和新的自适应到达定律(NARL)。首先,通过分析EHSAS的流量连续方程来避免使用状态观测器,从而获得降阶模型。其次,提出了DSMO来估计和补偿降阶模型中存在的失配干扰。此外,还开发了NARL以解决SMC固有的抖动问题。在将AMESim与MATLAB / Simulink相结合构建的EHSAS协同仿真平台上,与广泛采用三环PID方法进行了广泛的仿真,以验证该方案的可行性和优越性。结果表明,颤振可以被有效地衰减,不匹配的干扰可以得到令人满意的补偿。此外,瞬态性能,稳态精度和位置控制的鲁棒性都得到了改善。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号