...
首页> 外文期刊>Materials Research Bulletin >Adsorption of fluoride from water by aligned carbon nanotubes
【24h】

Adsorption of fluoride from water by aligned carbon nanotubes

机译:排列的碳纳米管从水中吸附氟化物

获取原文
获取原文并翻译 | 示例
           

摘要

Aligned carbon nanotubes (ACNTs), a new type of carbon material, were prepared by catalytic decomposition of xylene using ferrocene as catalyst. The kinetics experiment of ACNTs shows that fluoride adsorption rate is fast in the first 60 min and the adsorption capacity reaches 3.0mg/g rapidly, then it decreases and adsorption achieves equilibrium gradually in about 180 min. The fluoride adsorption of ACNTs depends slightly on the solution pH value. The highest adsorption capacity of ACNTs occurs at pH 7 and reaches 4.5mg/g at equilibrium fluoride concentration of 15mg/l. The experimental results indicate that ACNTs are promising candidate materials for fluoride removal.
机译:对准碳纳米管(ACNTs)是一种新型的碳材料,是通过使用二茂铁作为催化剂对二甲苯进行催化分解而制备的。 ACNTs的动力学实验表明,在开始的60分钟内,氟化物的吸附速度很快,吸附容量迅速达到3.0mg / g,然后下降,并在约180分钟内逐渐达到平衡。 ACNT的氟化物吸附在一定程度上取决于溶液的pH值。 ACNT的最高吸附容量出现在pH值为7的情况下,在氟化物平衡浓度为15mg / l时达到4.5mg / g。实验结果表明,ACNTs是有望去除氟化物的候选材料。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号