首页> 外文期刊>Materials Letters >Microwave characteristics of Sm(Co_(1/2)Ti_(1/2))O_3 dielectric resonators
【24h】

Microwave characteristics of Sm(Co_(1/2)Ti_(1/2))O_3 dielectric resonators

机译:Sm(Co_(1/2)Ti_(1/2))O_3介质谐振器的微波特性

获取原文
获取原文并翻译 | 示例
       

摘要

The microwave dielectric properties of Sm(Co_(1/2)Ti_(1/2))O_3 ceramics have been investigated. Sm(Co_(1/2)Ti_(1/2))O_3 ceramics were prepared by conventional solid-state route. The dielectric constant values (epsilon_r) saturated at 23.5-25.5. The Q X f values of 21,500-76,000 (at 10 GHz) can be obtained when the sintering temperatures are in the range of 1300-1420 deg C. The temperature coefficient of resonant frequency tau_f was a function of sintering temperature. The epsilon_r value of 25.5, Q X f value of 76,000 (at 10 GHz) and tau_f value of - 16.3 ppm/deg C were obtained for Sm(Co_(1/2)Ti_(1/2))O_3 ceramics sintered at 1360 deg C for 4 h. For applications of high selective microwave ceramic resonator, filter and antenna, Sm(Co_(1/2)Ti_(1/2))O_3 is proposed as a suitable material candidate.
机译:研究了Sm(Co_(1/2)Ti_(1/2))O_3陶瓷的微波介电性能。采用常规固态法制备了Sm(Co_(1/2)Ti_(1/2))O_3陶瓷。介电常数值(ε_r)在23.5-25.5处饱和。当烧结温度在1300-1420℃的范围内时,可获得的Q X f值为21,500-76,000(在10 GHz时)。谐振频率tau_f的温度系数是烧结温度的函数。对于在1360度烧结的Sm(Co_(1/2)Ti_(1/2))O_3陶瓷,ε值为25.5,QX f值为76,000(在10 GHz下),tau_f值为-16.3 ppm /℃。 C持续4小时。对于高选择性微波陶瓷谐振器,滤波器和天线的应用,建议使用Sm(Co_(1/2)Ti_(1/2))O_3作为合适的候选材料。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号