首页> 外文期刊>Materials Letters >The multi-staged formation process of titanium oxide nanotubes and its thermal stability
【24h】

The multi-staged formation process of titanium oxide nanotubes and its thermal stability

机译:氧化钛纳米管的多阶段形成过程及其热稳定性

获取原文
获取原文并翻译 | 示例
       

摘要

The multi-staged formation process of titanium oxide nanotubes was investigated in detail under a hydrothermal treatment. During the synthesis procedure, an intermediate stage (tree-like structures) was observed before the formation of the titanium oxide layered structures. The layered structure of titanium oxide generally was considered to exfoliate directly from raw TiO_2 materials through the alkaline hydrothermal treatment. The rolling process of the layered structures of titanium oxide was confirmed by TEM observation after the alkaline hydrothermal treatment for the raw TiO_2 materials, followed by washing with 4 M HNO_3 aqueous solution. The thermal stability of the tube products was investigated by X-ray diffraction (XRD) and scanning electron microscope (SEM). The result showed that both the morphology and crystal phase of titanium oxide nanotubes could be retained even after calcination at 650℃.
机译:在水热处理条件下详细研究了氧化钛纳米管的多阶段形成过程。在合成过程中,在形成氧化钛层状结构之前观察到中间阶段(树状结构)。通常认为二氧化钛的层状结构通过碱性水热处理直接从原始的TiO_2材料中剥离。在对原料TiO_2进行碱性水热处理后,通过TEM观察证实了氧化钛层状结构的轧制过程,然后用4 M HNO_3水溶液洗涤。通过X射线衍射(XRD)和扫描电子显微镜(SEM)研究了管产品的热稳定性。结果表明,即使在650℃煅烧后,钛氧化物纳米管的形貌和晶相都可以保留。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号