Effect of nitriding and shot-peening on the fatigue behavior of 42CrMo4 steel: Experimental analysis and predictive approach

摘要

In this work, we are interested in the bending fatigue resistance of the nitrided 42CrMo4 steel improvement by shot-peening. The micro-structure, the micro-hardness, the residual stresses distribution and the crack resistance of the hardened steel are determined. The gains, expressed in term of endurance limit, brought by these treatments are established by three-points bending fatigue tests and discussed in relation to the residual stresses evolution under the cyclic loading conditions. The fatigue fracture resistance after a combined process of surface hardening including shot peening followed by nitriding is analyzed by methods of fracture mechanisms. This reveals that the gain provided by the nitriding is about 8% against 35% for the nitriding with shot-peening. This is primarily allotted to a high level of com-pressive residual stresses for nitrided + shot-peened state compared to the nitrided state. The fast relaxation of these stresses in the low cycle fatigue domain is at the origin of the fatigue fracture at surface, which leads to a lower fatigue fracture resistance compared to the untreated state. Based on multiaxial HCF criterion of Sines and taking into account the different surface properties, a local predictive approach was developed.