Optical microscopy visualization on droplet relaxation and breakup in a LDPE modified bitumen

摘要

The in-service performance of polymer modified bitumens (PMBs) is strongly affected by the deformation/break-up process experienced by the dispersed phase during mixing and interfacial tension between the phases. However, not much work on this matter has been conducted. The only related approach is that proposed by Lesueur et al. (1998), who found values on the order of 10(-5)-10(-6) N/m by the best adjustment of the Palierne model to diblock poly(styrene-b-butadiene) (SB) modified asphalts experimental data at 120 degrees C. Using an optical shearing apparatus, we also found interfacial tension values on the order of 10(-6) N/m for a low density polyethylene (LOPE) modified bitumen at 180 degrees C. This result is based on the direct observation on the relaxation of ellipsoidal drops and threads back to their spherical shape at rest. Further experiments on the breakup of extended filaments during retraction and the droplet deformation under oscillatory shear were also carried out. We experimentally prove that, on the timescale associated to thread retraction, the breakup of LDPE modified bitumens is governed by the so-called "end-pinching" mechanism. Moreover, when subject to oscillatory shear, the LOPE-rich droplets aligned parallel to the flow direction up to a critical shear rate value from which transverse orientation was observed. (C) 2016 Elsevier Ltd. All rights reserved.