...
首页> 外文期刊>Magnetic Resonance in Medicine >Optimal radiofrequency and gradient spoiling for improved accuracy of T1 and B1 measurements using fast steady-state techniques
【24h】

Optimal radiofrequency and gradient spoiling for improved accuracy of T1 and B1 measurements using fast steady-state techniques

机译:使用快速稳态技术优化射频和梯度扰动以提高T1和B1测量的准确性

获取原文
获取原文并翻译 | 示例
           

摘要

Variable flip angle T1 mapping and actual flip-angle imaging B1 mapping are widely used quantitative MRI methods employing radiofrequency spoiled gradient-echo pulse sequences. Incomplete elimination of the transverse magnetization in these sequences has been found to be a critical source of T1 and B1 measurement errors. In this study, comprehensive theoretical analysis of spoiling-related errors in variable flip angle and actual flip-angle imaging methods was performed using the combined isochromat summation and diffusion propagator model and validated by phantom experiments. The key theoretical conclusion is that correct interpretation of spoiling phenomena in fast gradient-echo sequences requires accurate consideration of the diffusion effect. A general strategy for improvement of T1 and B1 measurement accuracy was proposed based on the strong spoiling regimen, where diffusion-modulated spatial averaging of isochromats becomes a dominant factor determining magnetization evolution. Practical implementation of strongly spoiled variable flip angle and actual flip-angle imaging techniques requires sufficiently large spoiling gradient areas (AG) in combination with optimal radiofrequency phase increments (ϕ0). Optimal regimens providing 2% relative T1 and B1 measurement errors in a variety of tissues were theoretically derived for prospective in vivo variable flip angle (pulse repetition time = 15–20 ms, AG = 280–450 mT·ms/m, ϕ0 = 169°) and actual flip-angle imaging (pulse repetition time1/pulse repetition time2 = 20/100 ms, AG1/AG2 = 450/2250 mT·ms/m, ϕ0 = 39°) applications based on 25 mT/m maximal available gradient strength. Magn Reson Med 63:1610–1626, 2010. © 2010 Wiley-Liss, Inc.
机译:可变翻转角T 1 映射和实际翻转角成像B 1 映射是使用射频损坏的梯度回波脉冲序列的定量MRI方法。发现这些序列中横向磁化强度的不完全消除是T 1 和B 1 测量误差的关键来源。在这项研究中,使用等色度求和与扩散传播的组合模型,对可变翻转角和实际翻转角成像方法中的变质相关误差进行了综合的理论分析,并通过幻像实验进行了验证。理论上的关键结论是,正确解释快速梯度回波序列中的破坏现象需要准确考虑扩散效应。基于强扰动方案,提出了提高T 1 和B 1 测量精度的一般策略,其中等色散的扩散调制空间平均成为决定磁化强度的主要因素演化。强变可变翻转角和实际翻转角成像技术的实际实现需要足够大的变差梯度区域(A G )和最佳射频相位增量(ϕ 0 ) 。理论上,针对预期的体内可变翻转角,得出了在各种组织中提供<2%相对T 1 和B 1 测量误差的最佳方案(脉冲重复时间= 15– 20 ms,A G = 280–450 mT·ms / m,ϕ 0 = 169°)和实际的翻转角度成像(脉冲重复时间 1 < / sub> /脉冲重复时间 2 = 20/100 ms,A G1 / A G2 = 450/2250 mT·ms / m, sub 0 = 39°)应用基于25 mT / m的最大可用梯度强度。 Magn Reson Med 63:1610–1626,2010。©2010 Wiley-Liss,Inc.

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号