首页> 外文期刊>Journal of University of Science and Technology Beijing >Mechanical Properties and Erosive Wear Resistance of Zirconia Toughened Al_2O_3-TiC Ceramics
【24h】

Mechanical Properties and Erosive Wear Resistance of Zirconia Toughened Al_2O_3-TiC Ceramics

机译:氧化锆增韧Al_2O_3-TiC陶瓷的力学性能和耐冲蚀磨损性能

获取原文
获取原文并翻译 | 示例
           

摘要

The effect of ZrO_2 content on the fracture toughness, flexural strength and Vickers hardness as well as the erosive wear resistant properties of zirconia toughened Al_2O_3-TiC ceramic composites has been investigated. The results showed that the improvement in fracture toughness and flexure strength of composites with the content of zirconia less than 50 and 10 in mass fraction respectively ,is primarily attributed to stress-induced transformation toughening by the analyse of X-ray diffraction. The dependance of erosion wear resistance on the attack angle and the content of ZrO_2 particles of the composites was also revealed. It is found that the erosion rate of the composites has a sharp rise at a attack angle over 65deg c .This phenomenon is due to a brittle response to the erosion test by microstructural observation on eroded surface.
机译:研究了ZrO_2含量对氧化锆增韧的Al_2O_3-TiC陶瓷复合材料的断裂韧性,弯曲强度和维氏硬度以及耐冲蚀磨损性能的影响。结果表明,质量分数分别小于50和10的氧化锆复合材料的断裂韧性和挠曲强度的提高,主要归因于X射线衍射分析的应力诱导相变韧化。揭示了复合材料的抗冲蚀磨损性能与攻角和ZrO_2颗粒含量的关系。结果表明,复合材料的腐蚀速率在攻角超过65℃时急剧增加。这种现象是由于在腐蚀表面上通过显微组织观察对腐蚀试验的脆性响应所致。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号