Experimental Simulation of Contaminant Deposition on a Film Cooled Turbine Airfoil Leading Edge

摘要

A significant challenge of utilizing coal-derived synthetic fuels for gas turbine engines is mitigating the adverse effects of fuel-born contaminant deposits on film cooled turbine surfaces. A new experimental technique has been developed that simulates the key physical, but not the chemical, aspects of coal ash deposition on film cooled turbine airfoil leading edges in order to better understand the interaction between film cooling and deposition and to produce improved film cooling designs. In this large-scale wind tunnel facility, the depositing contaminants were modeled with atomized molten wax droplets sized to match the Stokes numbers of coal ash particles in the engine conditions. The sticking mechanism of the molten contaminants to the turbine surfaces was modeled by ensuring the wax droplets remained somewhat molten when they arrived at the cooled model surface. The airfoil model and wax deposits had thermal conductivities such that they matched the Biot numbers of clean and fouled turbine airfoils at engine conditions. The behavior of the deposit growth was controlled by adjusting the mainstream, coolant, and wax solidification temperatures. Simulated deposits were created for a range of test durations, film cooling blowing ratios, and controlling temperatures. Inspection of the resulting deposits revealed aspects of the flow field that augment and suppress deposition. Deposit thickness was found to increase in time until an equilibrium thickness was attained. Blowing ratio and the difference between mainstream and wax solidification temperatures strongly affected characteristics of the deposits. Model surface temperatures greatly reduced under the deposits as they developed.